SAREF extension for building

IRI:
https://saref.etsi.org/saref4bldg/
Version IRI:
https://saref.etsi.org/saref4bldg/v1.1.2/
Current version:
v1.1.2
Authors:
http://purl.org/net/mpoveda
http://www.garcia-castro.com/foaf.rdf#me
Publisher:
https://www.etsi.org/
Other visualisation:
Ontology source

Abstract

Information about changes compared to version 1.1.1: - Updated namespaces for compatibility with SAREF v3.

Table of Content

  1. Classes
  2. Object Properties
  3. Data Properties
  4. Annotation Properties
  5. Namespace Declarations

Classes

Actuatorc back to ToC or Class ToC

IRI: https://saref.etsi.org/core/Actuator

is defined by
https://saref.etsi.org/core/
A device responsible for moving or controlling a mechanism or system
has sub-classes
Actuatorc

Actuatorc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Actuator

An actuator is a mechanical device for moving or controlling a mechanism or system. An actuator takes energy, usually created by air, electricity, or liquid, and converts that into some kind of motion.
has super-classes
Actuatorc
Distribution control devicec
fail positiondp only string
manual overridedp only boolean

Air to air heat recoveryc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/AirToAirHeatRecovery

An air-to-air heat recovery device employs a counter-flow heat exchanger between inbound and outbound air flow. It is typically used to transfer heat from warmer air in one chamber to cooler air in the second chamber (i.e., typically used to recover heat from the conditioned air being exhausted and the outside air being supplied to a building), resulting in energy savings from reduced heating (or cooling) requirements.
has super-classes
Energy conversion devicec
secondary air flow rate rangeop only Measurementc
operation temperature rangeop only Measurementc
secondary air flow rate rangeop only Measurementc
heat transfer type enumdp only string
primary air flow rate rangeop only Measurementc
operation temperature rangeop only Measurementc
has defrostdp only boolean
primary air flow rate rangeop only Measurementc

Alarmc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Alarm

An alarm is a device that signals the existence of a condition or situation that is outside the boundaries of normal expectation or that activates such a device. Alarms include the provision of break glass buttons and manual pull boxes that are used to activate alarms.
has super-classes
Distribution control devicec

Audio visual appliancec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/AudioVisualAppliance

An audio-visual appliance is a device that displays, captures, transmits, or receives audio or video. Audio-visual appliances may be fixed in place or may be able to be moved from one space to another. They may require an electrical supply that may be supplied either by an electrical circuit or provided from a local battery source. Audio-visual appliances may be connected to data circuits including specialist circuits for audio visual purposes only.
has super-classes
Flow terminalc
media sourcedp only string
audio volumeop only Measurementc

Boilerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Boiler

A boiler is a closed, pressure-rated vessel in which water or other fluid is heated using an energy source such as natural gas, heating oil, or electricity. The fluid in the vessel is then circulated out of the boiler for use in various processes or heating applications.
has super-classes
Energy conversion devicec
outlet temperature rangeop only Measurementc
water inlet temperature rangeop only Measurementc
heat transfer surface areaop only Measurementc
nominal energy consumptionop only Measurementc
operating modedp only string
water storage capacityop only Measurementc
is water storage heaterdp only boolean
pressure ratingop only Measurementc
nominal part load ratioop only Measurementc
outlet temperature rangeop only Measurementc
water inlet temperature rangeop only Measurementc
energy sourcedp only string

Buildingc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Building

A building represents a structure that provides shelter for its occupants or contents and stands in one place. The building is also used to provide a basic element within the spatial structure hierarchy for the components of a building project (together with site, storey, and space).
has super-classes
has spaceop only Building spacec

Building devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/BuildingDevice

A tangible object designed to accomplish a particular task in a building.
has super-classes
Devicec
Building objectc
has sub-classes
Distribution devicec, Shading devicec

Building objectc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/BuildingObject

An object in the building that can be controlled by devices, such as a door or a window that can be automatically opened or closed by an actuator. (Definition taken from SAREF 1.0)
has super-classes
Physical objectc
has sub-classes
Building devicec

Building spacec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/BuildingSpace

An entity used to define the physical spaces of the building. A building space contains devices or building objects.
has super-classes
isSpaceOfop only Buildingc or Building spacec
containsop only Physical objectc
has spaceop only Building spacec

Burnerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Burner

A burner is a device that converts fuel into heat through combustion. It includes gas, oil, and wood burners.
has super-classes
Energy conversion devicec
energy sourcedp only string

Chillerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Chiller

A chiller is a device used to remove heat from a liquid via a vapor-compression or absorption refrigeration cycle to cool a fluid, typically water or a mixture of water and glycol. The chilled fluid is then used to cool and dehumidify air in a building.
has super-classes
Energy conversion devicec
nominal evaporating temmperatureop only Measurementc
nominal condensing temperatureop only Measurementc
nominal heat rejection rateop only Measurementc
nominal capacityop only Measurementc
nominal power consumptionop only Measurementc
nominal efficiencyop only Measurementc

Coilc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Coil

A coil is a device used to provide heat transfer between non-mixing media. A common example is a cooling coil, which utilizes a finned coil in which circulates chilled water, antifreeze, or refrigerant that is used to remove heat from air moving across the surface of the coil. A coil may be used either for heating or cooling purposes by placing a series of tubes (the coil) carrying a heating or cooling fluid into an airstream. The coil may be constructed from tubes bundled in a serpentine form or from finned tubes that give a extended heat transfer surface. Coils may also be used for non-airflow cases such as embedded in a floor slab.
has super-classes
Energy conversion devicec
operation temperature rangeop only Measurementc
nominal uaop only Measurementc
nominal latent capacityop only Measurementc
nominal sensible capacityop only Measurementc
air flow rate range maxop only Measurementc
placement typedp only string
operation temperature rangeop only Measurementc
air flow rate range minop only Measurementc

Communication appliancec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/CommunicationAppliance

A communications appliance transmits and receives electronic or digital information as data or sound. Communication appliances may be fixed in place or may be able to be moved from one space to another. Communication appliances require an electrical supply that may be supplied either by an electrical circuit or provided from a local battery source.
has super-classes
Flow terminalc

Compressorc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Compressor

A compressor is a device that compresses a fluid typically used in a refrigeration circuit.
has super-classes
Flow moving devicec
ideal capacityop only Measurementc
maximum part load ratioop only Measurementc
nominal capacityop only Measurementc
refrigerant classdp only string
power sourcedp only string
has hot gas bypassdp only boolean
impeller diameterop only Measurementc
minimum part load ratioop only Measurementc
compressor speedop only Measurementc
ideal shaft powerop only Measurementc

Condenserc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Condenser

A condenser is a device that is used to dissipate heat, typically by condensing a substance such as a refrigerant from its gaseous to its liquid state.
has super-classes
Energy conversion devicec
nominal heat transfer areaop only Measurementc
nominal heat transfer coefficientop only Measurementc
internal refrigerant volumeop only Measurementc
internal surface areaop only Measurementc
internal water volumeop only Measurementc
refrigerant classdp only string
external surface areaop only Measurementc

Controllerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Controller

A controller is a device that monitors inputs and controls outputs within a building automation system. A controller may be physical (having placement within a spatial structure) or logical (a software interface or aggregated within a programmable physical controller).
has super-classes
Distribution control devicec

Cooled beamc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/CooledBeam

A cooled beam (or chilled beam) is a device typically used to cool air by circulating a fluid such as chilled water through exposed finned tubes above a space. Typically mounted overhead near or within a ceiling, the cooled beam uses convection to cool the space below it by acting as a heat sink for the naturally rising warm air of the space. Once cooled, the air naturally drops back to the floor where the cycle begins again.
has super-classes
Energy conversion devicec
water flow control system typedp only string
water pressure rangeop only Measurementc
coil widthop only Measurementc
nominal cooling capacityop only Measurementc
is free hangingdp only boolean
coil lengthop only Measurementc
nominal return water temperature coolingop only Measurementc
nominal water flow coolingop only Measurementc
finish colordp only string
nominal heating capacityop only Measurementc
water pressure rangeop only Measurementc
pipe connection enumdp only string
nominal sorrounding temperature heatingop only Measurementc
nominal return water temperature heatingop only Measurementc
nominal supply water temperature coolingop only Measurementc
nominal sorrounding humidity coolingop only Measurementc
nominal supply water temperature heatingop only Measurementc
nominal sorrounding temperature coolingop only Measurementc
integrated lighting typedp only string
nominal water flow heatingop only Measurementc

Cooling towerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/CoolingTower

A cooling tower is a device which rejects heat to ambient air by circulating a fluid such as water through it to reduce its temperature by partial evaporation.
has super-classes
Energy conversion devicec
circuit typedp only string
water requirementop only Measurementc
ambient design dry bulb temperatureop only Measurementc
spray typedp only string
operation temperature rangeop only Measurementc
number of cellsdp only integer
flow arrangementdp only string
capacity controldp only string
lift elevation differenceop only Measurementc
nominal capacityop only Measurementc
control strategydp only string
basin reserve volumeop only Measurementc
ambient design wet bulb temperatureop only Measurementc
operation temperature rangeop only Measurementc

Damperc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Damper

A damper typically participates in an HVAC duct distribution system and is used to control or modulate the flow of air.
has super-classes
Flow controllerc
orientationdp only string
number of bladesdp only integer
air flow rate range maxop only Measurementc
maximum working pressureop only Measurementc
operationdp only string
operation temperature rangeop only Measurementc
close off ratingop only Measurementc
nominal air flow rateop only Measurementc
frame depthop only Measurementc
temperature ratingop only Measurementc
blade shapedp only string
leakage fully closedop only Measurementc
blade thicknessop only Measurementc
frame thicknessop only Measurementc
frame typedp only string
blade edgedp only string
blade actiondp only string
face areaop only Measurementc
open pressure dropop only Measurementc
operation temperature rangeop only Measurementc

Devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/core/Device

is defined by
https://saref.etsi.org/core/
A tangible object designed to accomplish a particular task in households, common public buildings or offices. In order to accomplish this task, the device performs one or more functions. For example, a washing machine is designed to wash (task) and to accomplish this task it performs the start and stop function.
has super-classes
Physical objectc
has sub-classes
Building devicec, Transport elementc, Vibration isolatorc

Distribution control devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/DistributionControlDevice

Represents devices of a building automation control system that are used to impart control over elements of a distribution system. (Definition adapated from http://www.buildingsmart-tech.org/ifc/IFC4/Add1/html/schema/ifcsharedbldgserviceelements/lexical/ifcdistributioncontrolelement.htm)
has super-classes
Distribution devicec
has sub-classes
Actuatorc, Alarmc, Controllerc, Flow instrumentc, Protective device tripping unitc, Sensorc, Unitary control elementc

Distribution devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/DistributionDevice

Generalization of all devices that participate in a distribution system. (Definition adapated from http://www.buildingsmart-tech.org/ifc/IFC4/Add1/html/schema/ifcproductextension/lexical/ifcdistributionelement.htm)
has super-classes
Building devicec
has sub-classes
Distribution control devicec, DistributionFlowDevicec

DistributionFlowDevicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/DistributionFlowDevice

Represents devices of a distribution system that facilitate the distribution of energy or matter, such as air, water or power. (Definition adapated from http://www.buildingsmart-tech.org/ifc/IFC4/Add1/html/schema/ifcsharedbldgserviceelements/lexical/ifcdistributionflowelement.htm)
has super-classes
Distribution devicec
has sub-classes
Energy conversion devicec, Flow controllerc, Flow moving devicec, Flow storage devicec, Flow terminalc, Flow treatment devicec

Duct silencerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/DuctSilencer

A duct silencer is a device that is typically installed inside a duct distribution system for the purpose of reducing the noise levels from air movement, fan noise, etc. in the adjacent space or downstream of the duct silencer device.
has super-classes
Flow treatment devicec
lengthop only Measurementc
air flow rate range maxop only Measurementc
operation temperature rangeop only Measurementc
weightop only Measurementc
air flow rate range minop only Measurementc
hydraulic diameterop only Measurementc
has exterior insulationdp only boolean
minimum working pressureop only Measurementc
maximum working pressureop only Measurementc
operation temperature rangeop only Measurementc

Electric appliancec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/ElectricAppliance

An electric appliance is a device intended for consumer usage that is powered by electricity. Electric appliances may be fixed in place or may be able to be moved from one space to another. Electric appliances require an electrical supply that may be supplied either by an electrical circuit or provided from a local battery source.
has super-classes
Flow terminalc

Electric flow storage devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/ElectricFlowStorageDevice

An electric flow storage device is a device in which electrical energy is stored and from which energy may be progressively released.
has super-classes
Flow storage devicec
nominal supply voltage offsetop only Measurementc
nominal frequencyop only Measurementc
nominal supply voltageop only Measurementc

Electric generatorc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/ElectricGenerator

An electric generator is an engine that is a machine for converting mechanical energy into electrical energy.
has super-classes
Energy conversion devicec
start current factorop only Measurementc
maximum power outputop only Measurementc
electric generator efficiencyop only Measurementc

Electric motorc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/ElectricMotor

An electric motor is an engine that is a machine for converting electrical energy into mechanical energy.
has super-classes
Energy conversion devicec
electric motor efficiencyop only Measurementc
motor enclosure typedp only string
te timeop only Measurementc
has part windingdp only boolean
starting timeop only Measurementc
locked rotor currentop only Measurementc
is guardeddp only boolean
start current factorop only Measurementc
frame sizedp only string
maximum power outputop only Measurementc

Electric time controlc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/ElectricTimeControl

An electric time control is a device that applies control to the provision or flow of electrical energy over time.
has super-classes
Flow controllerc

Energy conversion devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/EnergyConversionDevice

The distribution flow element EnergyConversionDevice defines the occurrence of a device used to perform energy conversion or heat transfer and typically participates in a flow distribution system.
has super-classes
DistributionFlowDevicec
has sub-classes
Air to air heat recoveryc, Boilerc, Burnerc, Chillerc, Coilc, Condenserc, Cooled beamc, Cooling towerc, Electric generatorc, Electric motorc, Enginec, Evaporative coolerc, Evaporatorc, Heat exchangerc, Humidifierc, Solar devicec, Transformerc, Tube bundlec

Enginec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Engine

An engine is a device that converts fuel into mechanical energy through combustion.
has super-classes
Energy conversion devicec
energy sourcedp only string

Evaporative coolerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/EvaporativeCooler

An evaporative cooler is a device that cools air by saturating it with water vapor.
has super-classes
Energy conversion devicec
heat exchange areaop only Measurementc
flow arrangementdp only string
operation temperature rangeop only Measurementc
operation temperature rangeop only Measurementc
water requirementop only Measurementc

Evaporatorc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Evaporator

An evaporator is a device in which a liquid refrigerent is vaporized and absorbs heat from the surrounding fluid.
has super-classes
Energy conversion devicec
external surface areaop only Measurementc
nominal heat transfer areaop only Measurementc
evaporation coolantdp only string
refrigerant classdp only string
internal water volumeop only Measurementc
internal refrigerant volumeop only Measurementc
evaporation medium typedp only string
nominal heat transfer coefficientop only Measurementc
internal surface areaop only Measurementc

Fanc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Fan

A fan is a device which imparts mechanical work on a gas. A typical usage of a fan is to induce airflow in a building services air distribution system.
has super-classes
Flow moving devicec
nominal power rateop only Measurementc
nominal air flow rateop only Measurementc
motor drive typedp only string
nominal total pressureop only Measurementc
nominal rotation speedop only Measurementc
operational riterialop only Measurementc
operation temperature rangeop only Measurementc
capacity control typedp only string
operation temperature rangeop only Measurementc
nominal static pressureop only Measurementc

Filterc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Filter

A filter is an apparatus used to remove particulate or gaseous matter from fluids and gases.
has super-classes
Flow treatment devicec
fluid flow rate rangeop only Measurementc
weightop only Measurementc
fluid flow rate rangeop only Measurementc
nominal filter face velocityop only Measurementc
nominal pressure dropop only Measurementc
final resistanceop only Measurementc
nominal media surface velocityop only Measurementc
operation temperature rangeop only Measurementc
nominal particle geometric mean diameterop only Measurementc
initial resistanceop only Measurementc
operation temperature rangeop only Measurementc
nominal flow rateop only Measurementc
nominal particle geometric standard deviationop only Measurementc

Fire suppression terminalc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/FireSuppressionTerminal

A fire suppression terminal has the purpose of delivering a fluid (gas or liquid) that will suppress a fire. A fire suppression terminal provides for all forms of sprinkler, spreader and other form of terminal that is connected to a pipework system and intended to act in the role of suppressing a fire.
has super-classes
Flow terminalc

Flow controllerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/FlowController

The distribution flow element FlowController defines the occurrence of elements of a distribution system that are used to regulate flow through a distribution system. Examples include dampers, valves, switches, and relays.
has super-classes
DistributionFlowDevicec
has sub-classes
Damperc, Electric time controlc, Flow meterc, Protective devicec, Switching devicec, Valvec

Flow instrumentc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/FlowInstrument

A flow instrument reads and displays the value of a particular property of a system at a point, or displays the difference in the value of a property between two points. Instrumentation is typically for the purpose of determining the value of the property at a point in time. It is not the purpose of an instrument to record or integrate the values over time (although they may be connected to recording devices that do perform such a function). This entity provides for all forms of mechanical flow instrument (thermometers, pressure gauges etc.) and electrical flow instruments (ammeters, voltmeters etc.)
has super-classes
Distribution control devicec

Flow meterc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/FlowMeter

A flow meter is a device that is used to measure the flow rate in a system.
has super-classes
Flow controllerc
read out typedp only string
remote readingdp only boolean

Flow moving devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/FlowMovingDevice

The distribution flow element FlowMovingDevice defines the occurrence of an apparatus used to distribute, circulate or perform conveyance of fluids, including liquids and gases (such as a pump or fan), and typically participates in a flow distribution system.
has super-classes
DistributionFlowDevicec
has sub-classes
Compressorc, Fanc, Pumpc

Flow storage devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/FlowStorageDevice

The distribution flow element FlowStorageDevice defines the occurrence of a device that participates in a distribution system and is used for temporary storage (such as a tank).
has super-classes
DistributionFlowDevicec
has sub-classes
Electric flow storage devicec, Tankc

Flow terminalc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/FlowTerminal

The distribution flow element FlowTerminal defines the occurrence of a permanently attached element that acts as a terminus or beginning of a distribution system (such as an air outlet, drain, water closet, or sink). A terminal is typically a point at which a system interfaces with an external environment.
has super-classes
DistributionFlowDevicec
has sub-classes
Audio visual appliancec, Communication appliancec, Electric appliancec, Fire suppression terminalc, Lampc, Medical devicec, Outletc, Sanitary terminalc, Space heaterc

Flow treatment devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/FlowTreatmentDevice

The distribution flow element FlowTreatmentDevice defines the occurrence of a device typically used to remove unwanted matter from a fluid, either liquid or gas, and typically participates in a flow distribution system.
has super-classes
DistributionFlowDevicec
has sub-classes
Duct silencerc, Filterc, Interceptorc

Heat exchangerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/HeatExchanger

A heat exchanger is a device used to provide heat transfer between non-mixing media such as plate and shell and tube heat exchangers. HeatExchanger is commonly used on water-side distribution systems to recover energy from a liquid to another liquid (typically water-based), whereas AirToAirHeatRecovery is commonly used on air-side distribution systems to recover energy from a gas to a gas (usually air).
has super-classes
Energy conversion devicec
arrangementdp only string

Humidifierc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Humidifier

A humidifier is a device that adds moisture into the air.
has super-classes
Energy conversion devicec
weightop only Measurementc
internal controldp only string
water requirementop only Measurementc
nominal moisture gainop only Measurementc
nominal air flow rateop only Measurementc
applicationdp only string

Interceptorc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Interceptor

An interceptor is a device designed and installed in order to separate and retain deleterious, hazardous or undesirable matter while permitting normal sewage or liquids to discharge into a collection system by gravity.
has super-classes
Flow treatment devicec
outlet connection sizeop only Measurementc
nominal body lengthop only Measurementc
ventilating pipe sizeop only Measurementc
nominal body widthop only Measurementc
cover widthop only Measurementc
nominal body depthop only Measurementc
cover lengthop only Measurementc
inlet connection sizeop only Measurementc

Lampc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Lamp

A lamp is an artificial light source such as a light bulb or tube.
has super-classes
Flow terminalc
lamp maintenance factorop only Measurementc
lamp compensation typedp only string
color rendering indexdp only integer
light emitter nominal powerop only Measurementc
minimum spectrumop only Measurementc
maximum spectrumop only Measurementc
lamp ballast typedp only string
contributed luminous fluxop only Measurementc
color temperatureop only Measurementc
color appearancedp only string

Measurementc back to ToC or Class ToC

IRI: https://saref.etsi.org/core/Measurement

is defined by
https://saref.etsi.org/saref4bldg/v1.1.2/
Represents the measured value made over a property. It is also linked to the unit of measure in which the value is expressed and the timestamp of the measurement.
has super-classes
is measured inop only Unit of measurec
is measured inop exactly 1 Unit of measurec
has timestampdp only date time
relates to propertyop exactly 1 Propertyc
relates to propertyop only Propertyc
is disjoint with
Propertyc, Unit of measurec

Medical devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/MedicalDevice

A medical device is attached to a medical piping system and operates upon medical gases to perform a specific function. Medical gases include medical air, medical vacuum, oxygen, carbon dioxide, nitrogen, and nitrous oxide.
has super-classes
Flow terminalc

Outletc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Outlet

An outlet is a device installed at a point to receive one or more inserted plugs for electrical power or communications. Power outlets are commonly connected within a junction box; data outlets may be directly connected to a wall. For power outlets sharing the same circuit within a junction box, the ports should indicate the logical wiring relationship to the enclosing junction box, even though they may be physically connected to a cable going to another outlet, switch, or fixture.
has super-classes
Flow terminalc
is pluggable outletdp only boolean
number os socketsdp only integer

Physical objectc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/PhysicalObject

Any Object that has a proper space region. (Definition extracted from DUL ontology)
has super-classes
containsop only Physical objectc
is contained inop only Building spacec or Physical objectc
has sub-classes
Building objectc, Devicec

Propertyc back to ToC or Class ToC

IRI: https://saref.etsi.org/core/Property

is defined by
https://saref.etsi.org/saref4bldg/v1.1.2/
An aspect of an entity that can be observable by a sensor.
is disjoint with
Measurementc, Unit of measurec

Protective devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/ProtectiveDevice

A protective device breaks an electrical circuit when a stated electric current that passes through it is exceeded. A protective device provides protection against electrical current only (not as a general protective device). It may be used to represent the complete set of elements including both the tripping unit and the breaking unit that provide the protection. This may be particularly useful at earlier stages of design where the approach to breaking the electrical supply may be determined but the method of tripping may not. Alternatively, this entity may be used to specifically represent the breaking unit alone (in which case the tripping unit will also be specifically identified). This entity is specific to dedicated protective devices and excludes electrical outlets that may have circuit protection.
has super-classes
Flow controllerc

Protective device tripping unitc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/ProtectiveDeviceTrippingUnit

A protective device tripping unit breaks an electrical circuit at a separate breaking unit when a stated electric current that passes through the unit is exceeded.
has super-classes
Distribution control devicec
limiting terminal sizeop only Measurementc
standarddp only string

Pumpc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Pump

A pump is a device which imparts mechanical work on fluids or slurries to move them through a channel or pipeline. A typical use of a pump is to circulate chilled water or heating hot water in a building services distribution system.
has super-classes
Flow moving devicec
flow resistance rangeop only Measurementc
flow resistance rangeop only Measurementc
connection sizeop only Measurementc
pump flow rate rangeop only Measurementc
operation temperature rangeop only Measurementc
operation temperature rangeop only Measurementc
pump flow rate rangeop only Measurementc
nomminal rotation speedop only Measurementc
net positive suction headop only Measurementc

Sanitary terminalc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/SanitaryTerminal

A sanitary terminal is a fixed appliance or terminal usually supplied with water and used for drinking, cleaning or foul water disposal or that is an item of equipment directly used with such an appliance or terminal.
has super-classes
Flow terminalc

Sensorc back to ToC or Class ToC

IRI: https://saref.etsi.org/core/Sensor

is defined by
https://saref.etsi.org/core/
A device that detects and responds to events or changes in the physical environment such as light, motion, or temperature changes. A device that has category saref:Sensor and performs a saref:SensingFunction.
has sub-classes
Sensorc

Sensorc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Sensor

A sensor is a device that measures a physical quantity and converts it into a signal which can be read by an observer or by an instrument.
has super-classes
Sensorc
Distribution control devicec

Shading devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/ShadingDevice

Shading devices are purpose built devices to protect from the sunlight, from natural light, or screening them from view. Shading devices can form part of the facade or can be mounted inside the building, they can be fixed or operable.
has super-classes
Building devicec
visible light reflectanceop only Measurementc
thermal transmittanceop only Measurementc
mechanical operateddp only boolean
roughnessdp only string
solar transmittanceop only Measurementc
shading device typedp only string
visible light transmittanceop only Measurementc
is externaldp only boolean
solar reflectanceop only Measurementc

Solar devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/SolarDevice

A solar device converts solar radiation into other energy such as electric current or thermal energy.
has super-classes
Energy conversion devicec

Space heaterc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/SpaceHeater

Space heaters utilize a combination of radiation and/or natural convection using a heating source such as electricity, steam or hot water to heat a limited space or area. Examples of space heaters include radiators, convectors, baseboard and finned-tube heaters. UnitaryEquipment should be used for packaged units supporting a combination of heating, cooling, and/or dehumidification; Coil should be used for coil-based floor heating.
has super-classes
Flow terminalc
heat transfer dimensiondp only string
placement typedp only string
temperature classificationdp only string
output capacityop only Measurementc
thermal mass heat capacityop only Measurementc
energy sourcedp only string
number of panelsdp only integer
body massop only Measurementc
thermal efficiencyop only Measurementc
heat transfer mediumdp only string
number of sectionsdp only integer

Switching devicec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/SwitchingDevice

A switch is used in a cable distribution system (electrical circuit) to control or modulate the flow of electricity. Switches include those used for electrical power, communications, audio-visual, or other distribution system types as determined by the available ports.
has super-classes
Flow controllerc
has lockdp only boolean
switch functiondp only string
number of gangsdp only integer
legenddp only string
is illuminateddp only boolean

Tankc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Tank

A tank is a vessel or container in which a fluid or gas is stored for later use.
has super-classes
Flow storage devicec
nominal volumetric capacityop only Measurementc
nominal width or diameterop only Measurementc
storage typedp only string
effective capacityop only Measurementc
access typedp only string
end shape typedp only string
nominal depthop only Measurementc
pattern typedp only string
number of sectionsdp only integer
operating weightop only Measurementc
second curvature radiusop only Measurementc
first curvature radiusop only Measurementc
nominal length or diameterop only Measurementc

Transformerc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Transformer

A transformer is an inductive stationary device that transfers electrical energy from one circuit to another. Transformer is used to transform electric power; conversion of electric signals for other purposes is handled at other entities: Controller converts arbitrary signals, AudioVisualAppliance converts signals for audio or video streams, and CommunicationsAppliance converts signals for data or other communications usage.
has super-classes
Energy conversion devicec
secondary voltageop only Measurementc
primary apparent powerop only Measurementc
primary voltageop only Measurementc
secondary currentop only Measurementc
secondary apparent powerop only Measurementc
secondary frequencyop only Measurementc
real impedance ratioop only Measurementc
is neutral primary terminal availabledp only boolean
primary frequencyop only Measurementc
is neutral secondary terminal availabledp only boolean
imaginary impedance ratioop only Measurementc
maximum apparent powerop only Measurementc
transformer vector groupdp only string
secondary current typedp only string
primary currentop only Measurementc

Transport elementc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/TransportElement

A transport element is a generalization of all transport related objects that move people, animals or goods within a building or building complex. The TransportElement defines the occurrence of a transport element.
has super-classes
Devicec
capacity peopledp only positive integer
fire exitdp only boolean
capacity weightop only Measurementc

Tube bundlec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/TubeBundle

A tube bundle is a device consisting of tubes and bundles of tubes used for heat transfer and contained typically within other energy conversion devices, such as a chiller or coil.
has super-classes
Energy conversion devicec
horizontal spacingop only Measurementc
nominal diameterop only Measurementc
volumenop only Measurementc
in line row spacingop only Measurementc
fouling factorop only Measurementc
inside diameterop only Measurementc
lengthop only Measurementc
staggered row spacingop only Measurementc
vertical spacingop only Measurementc
number of circuitsdp only integer
outside diameterop only Measurementc
thermal conductivityop only Measurementc
number of rowsdp only integer
has turbulatordp only boolean

Unit of measurec back to ToC or Class ToC

IRI: https://saref.etsi.org/core/UnitOfMeasure

is defined by
https://saref.etsi.org/core/
The unit of measure is a standard for measurement of a quantity, such as a Property. For example, Power is a property and Watt is a unit of power that represents a definite predetermined power: when we say 10 Watt, we actually mean 10 times the definite predetermined power called "watt". Our definition is based on the definition of unit of measure in the Ontology of units of Measure (OM). We propose here a list of some units of measure that are relevant for the purpose of the Smart Appliances ontology, but this list can be extended.
is disjoint with
Measurementc, Propertyc

Unitary control elementc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/UnitaryControlElement

A unitary control element combines a number of control components into a single product, such as a thermostat or humidistat. A unitary control element provides a housing for an aggregation of control or electrical distribution elements that, in combination, perform a singular (unitary) purpose. Each item in the aggregation may have its own geometric representation and location.
has super-classes
Distribution control devicec

Valvec back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/Valve

A valve is used in a building services piping distribution system to control or modulate the flow of the fluid.
has super-classes
Flow controllerc
close off ratingop only Measurementc
valve mechanismdp only string
valve patterndp only string
sizeop only Measurementc
working pressureop only Measurementc
flow coefficientop only Measurementc
valve operationdp only string
test pressureop only Measurementc

Vibration isolatorc back to ToC or Class ToC

IRI: https://saref.etsi.org/saref4bldg/VibrationIsolator

A vibration isolator is a device used to minimize the effects of vibration transmissibility in a building.
has super-classes
Devicec
maximum supported weightop only Measurementc
vibration transmissibilityop only Measurementc
heightop only Measurementc
isolator compressibilityop only Measurementc
isolator static deflectionop only Measurementc

Object Properties

air flow rate range maxop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/airFlowRateMax

Maximum allowable air flow rate. Usually measured in m3/s.

air flow rate range minop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/airFlowRateMin

Minimum allowable air flow rate. Usually measured in m3/s.

ambient design dry bulb temperatureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/ambientDesignDryBulbTemperature

Ambient design dry bulb temperature used for selecting the cooling tower. Usually measured in degrees Kelvin (K).

ambient design wet bulb temperatureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/ambientDesignWetBulbTemperature

Ambient design wet bulb temperature used for selecting the cooling tower. Usually measured in degrees Kelvin (K).

audio volumeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/audioVolume

Indicates discrete audio volume levels and corresponding sound power offsets, if applicable. Missing values may be interpolated. Measured in watts.

basin reserve volumeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/basinReserveVolume

Volume between operating and overflow levels in cooling tower basin. Usually measured in cubic metre (m3).

blade thicknessop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/bladeThickness

The thickness of the damper blade. Usually measured in millimeters (mm).

body massop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/bodyMass

Overall body mass of the heater. Usually measured in kilograms (kg) or grams (g).

capacity weightop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/capacityWeight

Capacity of the transport element measured by weight. Usually measured in kilograms (kg) or grams (g).

close off ratingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/closeOffRating

Close off rating. Usually measured in Pascals (Pa, N/m2).

coil lengthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/coilLength

Length of coil. Usually measured in millimeters (mm).

coil widthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/coilWidth

Width of coil. Usually measured in millimeters (mm

color temperatureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/colorTemperature

The color temperature of any source of radiation is defined as the temperature (in Kelvin) of a black-body or Planckian radiator whose radiation has the same chromaticity as the source of radiation. Often the values are only approximate color temperatures as the black-body radiator cannot emit radiation of every chromaticity value. The color temperatures of the commonest artificial light sources range from less than 3000K (warm white) to 4000K (intermediate) and over 5000K (daylight). Usually measured in degrees Kelvin (K).

compressor speedop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/compressorSpeed

Compressor speed. Usually measured in cycles/s.

connection sizeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/connectionSize

The connection size of the to and from the pump. Usually measured in millimeters (mm).

containsop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/contains

A relation between a physical space and the objects located in such space.

has characteristics: transitive

is inverse of
is contained inop

contributed luminous fluxop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/contributedLuminousFlux

Luminous flux is a photometric measure of radiant flux, i.e. the volume of light emitted from a light source. Luminous flux is measured either for the interior as a whole or for a part of the interior (partial luminous flux for a solid angle). All other photometric parameters are derivatives of luminous flux. Luminous flux is measured in lumens (lm). The luminous flux is given as a nominal value for each lamp. Usually measured in Lumen (lm, Candela Steradian).

cover lengthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/coverLength

The length measured along the x-axis in the local coordinate system or the radius (in the case of a circular shape in plan) of the cover of the oil interceptor. Usually measured in millimeters (mm).

cover widthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/coverWidth

The length measured along the x-axis in the local coordinate system of the cover of the oil interceptor. Usually measured in millimeters (mm).

effective capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/effectiveCapacity

The total effective or actual volumetric capacity of the tank. Usually measured in cubic metre (m3).B3

electric generator efficiencyop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/electricGeneratorEfficiency

The ratio of output capacity to intake capacity.

electric motor efficiencyop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/electricMotorEfficiency

The ratio of output capacity to intake capacity.

external surface areaop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/externalSurfaceArea

External surface area (both primary and secondary area). Usually measured in square metre (m2).

face areaop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/faceArea

Face area open to the airstream. Usually measured in square metre (m2).

final resistanceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/finalResistance

Filter fluid resistance when replacement is required (i.e., Pressure drop at the maximum air flowrate across the filter when the filter needs replacement per ASHRAE Standard 52.1). Usually measured in Pascals (Pa, N/m2).

first curvature radiusop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/firstCurvatureRadius

FirstCurvatureRadius should be defined as the base or left side radius of curvature value. Usually measured in millimeters (mm).

flow coefficientop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/flowCoefficient

Flow coefficient (the quantity of fluid that passes through a fully open valve at unit pressure drop), typically expressed as the Kv or Cv value for the valve.

flow resistance rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/flowResistanceMax

Allowable range of frictional resistance against which the fluid is being pumped. Usually measured in Pascals (Pa, N/m2).

flow resistance rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/flowResistanceMin

Allowable range of frictional resistance against which the fluid is being pumped. Usually measured in Pascals (Pa, N/m2).

fluid flow rate rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/fluidFlowRateMax

Possible range of fluid flowrate that can be delivered. Usually measured in m3/s.

fluid flow rate rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/fluidFlowRateMin

Possible range of fluid flowrate that can be delivered. Usually measured in m3/s.

fouling factorop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/foulingFactor

Fouling factor of the tubes in the tube bundle. Usually measured in m2 Kelvin/Watt.

frame depthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/frameDepth

The length (or depth) of the damper frame. Usually measured in millimeters (mm).

frame thicknessop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/frameThickness

The thickness of the damper frame material. Usually measured in millimeters (mm).

has spaceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/hasSpace

Relation between a building or a building space and the spaces it can be divided into.

has characteristics: transitive

is inverse of
isSpaceOfop

heat exchange areaop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/heatExchangeArea

Heat exchange area. Usually measured in square metre (m2).

heat transfer surface areaop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/heatTransferSurfaceArea

Total heat transfer area of the vessel. Usually measured in square metre (m2).

heightop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/height

Height of the vibration isolator before tha application of load. Usually measured in millimeters (mm).

horizontal spacingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/horizontalSpacing

Horizontal spacing between tubes in the tube bundle. Usually measured in millimeters (mm).

hydraulic diameterop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/hydraulicDiameter

Hydraulic diameter. Usually measured in millimeters (mm).

ideal capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/idealCapacity

Compressor capacity under ideal conditions. Usually measured in Watts (W, J/s).

ideal shaft powerop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/idealShaftPower

Compressor shaft power under ideal conditions. Usually measured in Watts (W, J/s).

imaginary impedance ratioop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/imaginaryImpedanceRatio

The ratio between the imaginary part of the zero sequence impedance and the imaginary part of the positive impedance (i.e. imaginary part of the short-circuit voltage) of the transformer. Used for three-phase transformer which includes a N-conductor.

impeller diameterop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/impellerDiameter

Diameter of compressor impeller - used to scale performance of geometrically similar compressors. Usually measured in millimeters (mm).

in line row spacingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/inLineRowSpacing

In-line tube row spacing. Usually measured in millimeters (mm).

initial resistanceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/initialResistance

Initial new filter fluid resistance (i.e., pressure drop at the maximum air flowrate across the filter when the filter is new per ASHRAE Standard 52.1). Usually measured in Pascals (Pa, N/m2).

inlet connection sizeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/inletConnectionSize

Size of the inlet connection. Usually measured in millimeters (mm).

inside diameterop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/insideDiameter

Actual inner diameter of the tube in the tube bundle. Usually measured in millimeters (mm).

internal refrigerant volumeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/internalRefrigerantVolume

Internal volume of evaporator (refrigerant side). Usually measured in cubic metre (m3).

internal surface areaop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/internalSurfaceArea

Internal surface area. Usually measured in square metre (m2).

internal water volumeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/internalWaterVolume

Internal volume of evaporator (water side). Usually measured in cubic metre (m3).

is contained inop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/isContainedIn

A relation between an object and the physical space in which it is located.

has characteristics: transitive

is inverse of
containsop

is measured inop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/core/isMeasuredIn

is defined by
https://saref.etsi.org/saref4bldg/v1.1.2/
A relation between a measurement and the unit of measure in which the measurement value is expressed.

isolator compressibilityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/isolatorCompressibility

The compressibility of the vibration isolator.

isolator static deflectionop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/isolatorStaticDeflection

Static deflection of the vibration isolator. Usually measured in millimeters (mm).

isSpaceOfop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/isSpaceOf

Relation between a building space and the building or building space it belongs to.

has characteristics: transitive

is inverse of
has spaceop

lamp maintenance factorop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/lampMaintenanceFactor

Non recoverable losses of luminous flux of a lamp due to lamp depreciation i.e. the decreasing of light output of a luminaire due to aging and dirt.

leakage fully closedop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/leakageFullyClosed

Leakage when fully closed. Usually measured in m3/s.

lengthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/length

The finished length of the device. Usually measured in millimeters (mm).

lift elevation differenceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/liftElevationDifference

Elevation difference between cooling tower sump and the top of the tower. Usually measured in millimeters (mm).

light emitter nominal powerop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/lightEmitterNominalPower

Light emitter nominal power. Usually measured in Watts (W, J/s).

limiting terminal sizeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/limitingTerminalSize

The maximum terminal size capacity of the device. Usually measured in square metre (m2).

locationop back to ToC or Object Property ToC

IRI: http://www.w3.org/2003/01/geo/wgs84_pos#location

is defined by
http://www.w3.org/2003/01/geo/wgs84_pos#
The relation between something and the point, or other geometrical thing in space, where it is. For example, the realtionship between a radio tower and a Point with a given lat and long. Or a relationship between a park and its outline as a closed arc of points, or a road and its location as a arc (a sequence of points). Clearly in practice there will be limit to the accuracy of any such statement, but one would expect an accuracy appropriate for the size of the object and uses such as mapping .

locked rotor currentop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/lockedRotorCurrent

Input current when a motor armature is energized but not rotating. Usually measured in Ampere (A).

maximum apparent powerop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/apparentPowerMax

Maximum apparent power/capacity in VA (volt ampere). Usually measured in Watts (W, J/s).

maximum part load ratioop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/partLoadRatioMax

Maximum part load ratio as a fraction of nominal capacity.

maximum power outputop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/powerOutputMax

The maximum output power rating of the engine. Usually measured in Watts (W, J/s).

maximum spectrumop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/spectrumMax

The spectrum of radiation describes its composition with regard to wavelength. Light, for example, as the portion of electromagnetic radiation that is visible to the human eye, is radiation with wavelengths in the range of approx. 380 to 780 nm (1 nm = 10 m). The corresponding range of colours varies from violet to indigo, blue, green, yellow, orange, and red. These colours form a continuous spectrum, in which the various spectral sectors merge into each other.

maximum supported weightop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/supportedWeightMax

The maximum weight that can be carried by the vibration isolator. Usually measured in kilograms (kg) or grams (g).

maximum working pressureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/workingPressureMax

Maximum working pressure. Usually measured in Pascals (Pa, N/m2).

minimum part load ratioop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/partLoadRatioMin

Minimum part load ratio as a fraction of nominal capacity.

minimum spectrumop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/spectrumMin

The spectrum of radiation describes its composition with regard to wavelength. Light, for example, as the portion of electromagnetic radiation that is visible to the human eye, is radiation with wavelengths in the range of approx. 380 to 780 nm (1 nm = 10 m). The corresponding range of colours varies from violet to indigo, blue, green, yellow, orange, and red. These colours form a continuous spectrum, in which the various spectral sectors merge into each other.

minimum working pressureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/workingPressureMin

Allowable minimum working pressure (relative to ambient pressure). Usually measured in Pascals (Pa, N/m2).

net positive suction headop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/netPositiveSuctionHead

Minimum liquid pressure at the pump inlet to prevent cavitation. Usually measured in Pascals (Pa, N/m2).

nominal air flow rateop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalAirFlowRate

Nominal rate of air flow. Usually measured in m3/s.

nominal body depthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalBodyDepth

Nominal or quoted =length, measured along the z-axis of the local coordinate system of the object, of the body of the object. Usually measured in millimeters (mm).

nominal body lengthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalBodyLength

Nominal or quoted length, measured along the x-axis of the local coordinate system of the object, of the body of the object. Usually measured in millimeters (mm).

nominal body widthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalBodyWidth

Nominal or quoted length, measured along the y-axis of the local coordinate system of the object, of the body of the object. Usually measured in millimeters (mm).

nominal capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalCapacity

Nominal capacity. Usually measured in Watts (W, J/s).

nominal condensing temperatureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalCondensingTemperature

Chiller condensing temperature. Usually measured in degrees Kelvin (K).

nominal cooling capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalCoolingCapacity

Nominal cooling capacity. Usually measured in Watts (W, J/s).

nominal depthop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalDepth

The nominal depth of the tank. Note: Not required for a horizontal cylindrical tank. Usually measured in millimeters (mm).

nominal diameterop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalDiameter

Nominal diameter or width of the tubes in the tube bundle. Usually measured in millimeters (mm).

nominal efficiencyop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalEfficiency

Nominal chiller efficiency under nominal conditions.

nominal energy consumptionop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalEnergyConsumption

Nominal fuel consumption rate required to produce the total boiler heat output. Usually measured in Watts (W, J/s).

nominal evaporating temmperatureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalEvaporatingTemmperature

Chiller evaporating temperature.Usually measured in degrees Kelvin (K).

nominal filter face velocityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalFilterFaceVelocity

Filter face velocity. Usually measured in m/s.

nominal flow rateop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalFlowRate

Nominal fluid flow rate through the filter. Usually measured in m3/s.

nominal frequencyop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalFrequency

The nominal frequency of the supply. Usually measured in cycles/s or Hertz (Hz).

nominal heat rejection rateop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalHeatRejectionRate

Sum of the refrigeration effect and the heat equivalent of the power input to the compressor. Usually measured in Watts (W, J/s).

nominal heat transfer areaop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalHeatTransferArea

Nominal heat transfer surface area associated with nominal overall heat transfer coefficient. Usually measured in square metre (m2).

nominal heat transfer coefficientop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalHeatTransferCoefficient

Nominal overall heat transfer coefficient associated with nominal heat transfer area. Usually measured in Watts/m2 Kelvin.

nominal heating capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalHeatingCapacity

Nominal heating capacity. Usually measured in Watts (W, J/s).

nominal latent capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalLatentCapacity

Nominal latent capacity. Usually measured in Watts (W, J/s).

nominal length or diameterop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalLengthOrDiameter

The nominal length or, in the case of a vertical cylindrical tank, the nominal diameter of the tank. Usually measured in millimeters (mm).

nominal media surface velocityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalMediaSurfaceVelocity

Average fluid velocity at the media surface. Usually measured in m/s.

nominal moisture gainop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalMoistureGain

Nominal rate of water vapor added into the airstream. Usually measured in kg/s.

nominal part load ratioop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalPartLoadRatio

Allowable part load ratio range.

nominal particle geometric mean diameterop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalParticleGeometricMeanDiameter

Particle geometric mean diameter associated with nominal efficiency. Usually measured in millimeters (mm).

nominal particle geometric standard deviationop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalParticleGeometricStandardDeviation

Particle geometric standard deviation associated with nominal efficiency.

nominal power consumptionop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalPowerConsumption

Nominal total power consumption. Usually measured in Watts (W, J/s).

nominal power rateop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalPowerRate

Nominal fan power rate.Usually measured in Watts (W, J/s).

nominal pressure dropop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalPressureDrop

Total pressure drop across the filter. Usually measured in Pascals (Pa, N/m2).

nominal return water temperature coolingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalReturnWaterTemperatureCooling

Nominal return water temperature (refers to nominal cooling capacity). Usually measured in degrees Kelvin (K).

nominal return water temperature heatingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalReturnWaterTemperatureHeating

Nominal return water temperature (refers to nominal heating capacity). Usually measured in degrees Kelvin (K).

nominal rotation speedop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalRotationSpeed

Nominal fan wheel speed. Usually measured in cycles/s.

nominal sensible capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSensibleCapacity

Nominal sensible capacity. Usually measured in Watts (W, J/s).

nominal sorrounding humidity coolingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSorroundingHumidityCooling

Nominal surrounding humidity (refers to nominal cooling capacity). Usually measured in degrees Kelvin (K).

nominal sorrounding temperature coolingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSorroundingTemperatureCooling

Nominal surrounding temperature (refers to nominal cooling capacity). Usually measured in degrees Kelvin (K).

nominal sorrounding temperature heatingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSorroundingTemperatureHeating

Nominal surrounding temperature (refers to nominal heating capacity). Usually measured in degrees Kelvin (K).

nominal static pressureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalStaticPressure

The static pressure within the air stream that the fan must overcome to insure designed circulation of air. Usually measured in Pascals (Pa, N/m2).

nominal supply voltageop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSupplyVoltage

The nominal voltage of the supply. Usually measured in Volts (V, W/A).

nominal supply voltage offsetop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSupplyVoltageMax

The maximum and minimum allowed voltage of the supply e.g. boundaries of 380V/440V may be applied for a nominal voltage of 400V.

nominal supply voltage offsetop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSupplyVoltageMin

The maximum and minimum allowed voltage of the supply e.g. boundaries of 380V/440V may be applied for a nominal voltage of 400V.

nominal supply water temperature coolingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSupplyWaterTemperatureCooling

Nominal supply water temperature (refers to nominal cooling capacity). Usually measured in degrees Kelvin (K).

nominal supply water temperature heatingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalSupplyWaterTemperatureHeating

Nominal supply water temperature (refers to nominal heating capacity). Usually measured in degrees Kelvin (K).

nominal total pressureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalTotalPressure

Nominal total pressure rise across the fan. Usually measured in Pascals (Pa, N/m2).

nominal uaop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalUa

Nominal UA value.

nominal volumetric capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalVolumetricCapacity

The total nominal or design volumetric capacity of the tank. Usually measured in cubic metre (m3).

nominal water flow coolingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalWaterFlowCooling

Nominal water flow (refers to nominal cooling capacity). Usually measured in m3/s.

nominal water flow heatingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalWaterFlowHeating

Nominal water flow (refers to nominal heating capacity). Usually measured in m3/s.

nominal width or diameterop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nominalWidthOrDiameter

The nominal width or, in the case of a horizontal cylindrical tank, the nominal diameter of the tank. Note: Not required for a vertical cylindrical tank. Usually measured in millimeters (mm).

nomminal rotation speedop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/nomminalRotationSpeed

Pump rotational speed under nominal conditions. Usually measured in cycles/s.

open pressure dropop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/openPressureDrop

Total pressure drop across damper. Usually measured in Pascals (Pa, N/m2).

operating weightop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/operatingWeight

Operating weight of the tank including all of its contents. Usually measured in kilograms (kg) or grams (g).

operation temperature rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/operationTemperatureMax

Allowable operation ambient (air, fluid) temperature range. Usually measured in degrees Kelvin (K).

operation temperature rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/operationTemperatureMin

Allowable operation ambient (air, fluid) temperature range. Usually measured in degrees Kelvin (K).

operational riterialop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/operationalRiterial

Time of operation at maximum operational ambient air temperature. Measured in seconds (s) or days (d) or other units of time.

outlet connection sizeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/outletConnectionSize

Size of the outlet connection. Usually measured in millimeters (mm).

outlet temperature rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/outletTemperatureMax

Allowable outlet temperature of either the water or the steam. Usually measured in degrees Kelvin (K).

outlet temperature rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/outletTemperatureMin

Allowable outlet temperature of either the water or the steam. Usually measured in degrees Kelvin (K).

output capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/outputCapacity

Total nominal heat output as listed by the manufacturer. Usually measured in Watts (W, J/s).

outside diameterop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/outsideDiameter

Actual outside diameter of the tube in the tube bundle. Usually measured in millimeters (mm).

pressure ratingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/pressureRating

Nominal pressure rating of the boiler as rated by the agency having jurisdiction. Usually measured in Pascals (Pa, N/m2).

primary air flow rate rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/primaryAirFlowRateMax

Maximum primary airflow that can be delivered. Usually measured in m3/s.

primary air flow rate rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/primaryAirFlowRateMin

Minimum primary airflow that can be delivered. Usually measured in m3/s.

primary apparent powerop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/primaryApparentPower

The power in VA (volt ampere) that has been transformed and that runs into the transformer on the primary side. Usually measured in Watts (W, J/s).

primary currentop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/primaryCurrent

The current that is going to be transformed and that runs into the transformer on the primary side. Usually measured in Ampere (A).

primary frequencyop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/primaryFrequency

The frequency that is going to be transformed and that runs into the transformer on the primary side. Usually measured in cycles/s or Hertz (Hz).

primary voltageop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/primaryVoltage

The voltage that is going to be transformed and that runs into the transformer on the primary side. Usually measured in Volts (V, W/A).

pump flow rate rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/pumpFlowRateMax

Allowable range of volume of fluid being pumped against the resistance specified. Usually measured in kg/s.

pump flow rate rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/pumpFlowRateMin

Allowable range of volume of fluid being pumped against the resistance specified. Usually measured in kg/s.

real impedance ratioop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/realImpedanceRatio

The ratio between the real part of the zero sequence impedance and the real part of the positive impedance (i.e. real part of the short-circuit voltage) of the transformer. Used for three-phase transformer which includes a N-conductor.

relates to propertyop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/core/relatesToProperty

is defined by
https://saref.etsi.org/saref4bldg/v1.1.2/
A relation between a measurement and the property such measurement is about.

second curvature radiusop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/secondCurvatureRadius

SecondCurvatureRadius should be defined as the top or right side radius of curvature value. Usually measured in millimeters (mm).

secondary air flow rate rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/secondaryAirFlowRateMax

Maximum secondary airflow that can be delivered. Usually measured in Pascals (Pa, N/m2).

secondary air flow rate rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/secondaryAirFlowRateMin

Maximum secondary airflow that can be delivered. Usually measured in Pascals (Pa, N/m2).

secondary apparent powerop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/secondaryApparentPower

The power in VA (volt ampere) that has been transformed and is running out of the transformer on the secondary side. Usually measured in Watts (W, J/s).

secondary currentop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/secondaryCurrent

The current that has been transformed and is running out of the transformer on the secondary side. Usually measured in Ampere (A).

secondary frequencyop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/secondaryFrequency

The frequency that has been transformed and is running out of the transformer on the secondary side. Usually measured in cycles/s or Hertz (Hz).

secondary voltageop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/secondaryVoltage

The voltage that has been transformed and is running out of the transformer on the secondary side. Usually measured in Volts (V, W/A).

short circuit voltageop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/shortCircuitVoltage

A complex number that specifies the real and imaginary parts of the short-circuit voltage at rated current of a transformer given in %.

sizeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/size

The size of the connection to the valve (or to each connection for faucets, mixing valves, etc.). Usually measured in millimeters (mm).

solar reflectanceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/solarReflectance

(Rsol): The ratio of incident solar radiation that is reflected by a shading system (also named _e). Note the following equation Asol + Rsol + Tsol = 1

solar transmittanceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/solarTransmittance

(Tsol) The ratio of incident solar radiation that directly passes through a shading system (also named _e). Note the following equation Asol + Rsol + Tsol = 1

staggered row spacingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/staggeredRowSpacing

Staggered tube row spacing. Usually measured in millimeters (mm).

start current factorop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/startCurrentFactor

IEC. Start current factor defines how large the peek starting current will become on the engine. StartCurrentFactor is multiplied to NominalCurrent and we get the start current.

starting timeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/startingTime

The time (in s) needed for the motor to reach its rated speed with its driven equipment attached, starting from standstill and at the nominal voltage applied at its terminals.

te timeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/teTime

The maximum time (in s) at which the motor could run with locked rotor when the motor is used in an EX-environment. The time indicates that a protective device should trip before this time when the starting current of the motor is slowing through the device.

temperature ratingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/temperatureRating

Temperature rating. Usually measured in degrees Kelvin (K).

test pressureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/testPressure

The maximum pressure to which the valve has been subjected under test. Usually measured in Pascals (Pa, N/m2).

thermal conductivityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/thermalConductivity

Fouling factor of the tubes in the tube bundle. Usually measured in m2 Kelvin/Watt.

thermal efficiencyop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/thermalEfficiency

Overall Thermal Efficiency is defined as gross energy output of the heat transfer device divided by the energy input.

thermal mass heat capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/thermalMassHeatCapacity

Product of component mass and specific heat.

thermal transmittanceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/thermalTransmittance

Rate at which energy is transmitted through a body. Usually measured in Watts/m2 Kelvin.

ventilating pipe sizeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/ventilatingPipeSize

Size of the ventilating pipe(s). Usually measured in millimeters (mm).

vertical spacingop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/verticalSpacing

Vertical spacing between tubes in the tube bundle.Usually measured in millimeters (mm).

vibration transmissibilityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/vibrationTransmissibility

The vibration transmissibility percentage.

visible light reflectanceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/visibleLightReflectance

Fraction of the visible light that is reflected by the glazing at normal incidence. It is a value without unit.

visible light transmittanceop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/visibleLightTransmittance

Fraction of the visible light that passes the shading system at normal incidence. It is a value without unit.

volumenop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/volumen

Total volume of fluid in the tubes and their headers. Usually measured in cubic metre (m3).

water inlet temperature rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/waterInletTemperatureMax

Allowable water inlet temperature range. Usually measured in degrees Kelvin (K).

water inlet temperature rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/waterInletTemperatureMin

Allowable water inlet temperature range. Usually measured in degrees Kelvin (K).

water pressure rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/waterPressureMax

Allowable water circuit working pressure range. Usually measured in Pascals (Pa, N/m2).

water pressure rangeop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/waterPressureMin

Allowable water circuit working pressure range. Usually measured in Pascals (Pa, N/m2).

water requirementop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/waterRequirement

Make-up water requirement. Usually measured in m3/s.

water storage capacityop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/waterStorageCapacity

Water storage capacity. Usually measured in cubic metre (m3).

weightop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/weight

The weight of the device. Usually measured in kilograms (kg) or grams (g).

working pressureop back to ToC or Object Property ToC

IRI: https://saref.etsi.org/saref4bldg/workingPressure

The normally expected maximum working pressure of the valve. Usually measured in Pascals (Pa, N/m2).

Data Properties

access typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/accessType

Defines the types of access (or cover) to a tank that may be specified. Note that covers are generally specified for rectangular tanks. For cylindrical tanks, access will normally be via a manhole.
has range
string

applicationdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/application

Humidifier application. Fixed: Humidifier installed in a ducted flow distribution system. Portable: Humidifier is not installed in a ducted flow distribution system.
has range
string

arrangementdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/arrangement

Defines the basic flow arrangements for the heat exchanger: COUNTERFLOW: Counterflow heat exchanger arrangement. CROSSFLOW: Crossflow heat exchanger arrangement. PARALLELFLOW: Parallel flow heat exchanger arrangement. MULTIPASS: Multipass flow heat exchanger arrangement. OTHER: Other type of heat exchanger flow arrangement not defined above.
has range
string

blade actiondp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/bladeAction

Blade action.
has range
string

blade edgedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/bladeEdge

Blade edge.
has range
string

blade shapedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/bladeShape

Blade shape. Flat means triple V-groove.
has range
string

capacity controldp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/capacityControl

FanCycling: Fan is cycled on and off to control duty. TwoSpeedFan: Fan is switched between low and high speed to control duty. VariableSpeedFan: Fan speed is varied to control duty. DampersControl: Dampers modulate the air flow to control duty. BypassValveControl: Bypass valve modulates the water flow to control duty. MultipleSeriesPumps: Turn on/off multiple series pump to control duty. TwoSpeedPump: Switch between high/low pump speed to control duty. VariableSpeedPump: vary pump speed to control duty.
has range
string

capacity control typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/capacityControlType

InletVane: Control by adjusting inlet vane. VariableSpeedDrive: Control by variable speed drive. BladePitchAngle: Control by adjusting blade pitch angle. TwoSpeed: Control by switch between high and low speed. DischargeDamper: Control by modulating discharge damper.
has range
string

capacity peopledp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/capacityPeople

Capacity of the transportation element measured in numbers of person.
has range
non negative integer

circuit typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/circuitType

OpenCircuit: Exposes water directly to the cooling atmosphere. CloseCircuit: The fluid is separated from the atmosphere by a heat exchanger. Wet: The air stream or the heat exchange surface is evaporatively cooled. Dry: No evaporation into the air stream. DryWet: A combination of a dry tower and a wet tower.
has range
string

color appearancedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/colorAppearance

In both the DIN and CIE standards, artificial light sources are classified in terms of their color appearance. To the human eye they all appear to be white the difference can only be detected by direct comparison. Visual performance is not directly affected by differences in color appearance.
has range
string

color rendering indexdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/colorRenderingIndex

The CRI indicates how well a light source renders eight standard colors compared to perfect reference lamp with the same color temperature. The CRI scale ranges from 1 to 100, with 100 representing perfect rendering properties.
has range
integer

control strategydp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/controlStrategy

FixedExitingWaterTemp: The capacity is controlled to maintain a fixed exiting water temperature. WetBulbTempReset: The set-point is reset based on the wet-bulb temperature.
has range
string

end shape typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/endShapeType

Defines the types of end shapes that can be used for preformed tanks. The convention for reading these enumerated values is that for a vertical cylinder, the first value is the base and the second is the top for a horizontal cylinder, the order of reading should be left to right. For a speherical tank, the value UNSET should be used.B5
has range
string

energy sourcedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/energySource

Enumeration defining the energy source or fuel cumbusted to generate heat.
has range
string

evaporation coolantdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/evaporationCoolant

The fluid used for the coolant in the evaporator.
has range
string

evaporation medium typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/evaporationMediumType

ColdLiquid: Evaporator is using liquid type of fluid to exchange heat with refrigerant. ColdAir: Evaporator is using air to exchange heat with refrigerant.
has range
string

fail positiondp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/failPosition

Specifies the required fail-safe position of the actuator.
has range
string

finish colordp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/finishColor

Finish color for cooled beam.
has range
string

fire exitdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/fireExit

Indication whether this object is designed to serve as an exit in the case of fire (TRUE) or not (FALSE). Here whether the transport element (in case of e.g., a lift) is designed to serve as a fire exit, e.g., for fire escape purposes.
has range
boolean

flow arrangementdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/flowArrangement

CounterFlow: Air and water flow enter in different directions. CrossFlow: Air and water flow are perpendicular. ParallelFlow: air and water flow enter in same directions.
has range
string

frame sizedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/frameSize

Designation of the frame size according to the named range of frame sizes designated at the place of use or according to a given standard.
has range
string

frame typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/frameType

The type of frame used by the damper (e.g., Standard, Single Flange, Single Reversed Flange, Double Flange, etc.).
has range
string

has defrostdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/hasDefrost

Whether the heat exchanger has defrost function or not.
has range
boolean

has exterior insulationdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/hasExteriorInsulation

TRUE if the silencer has exterior insulation. FALSE if it does not.
has range
boolean

has hot gas bypassdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/hasHotGasBypass

Whether or not hot gas bypass is provided for the compressor. TRUE = Yes, FALSE = No.
has range
boolean

has lockdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/hasLock

Indication of whether a switching device has a key operated lock (=TRUE) or not (= FALSE).
has range
boolean

has part windingdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/hasPartWinding

Indication of whether the motor is single speed, i.e. has a single winding (= FALSE) or multi-speed i.e.has part winding (= TRUE) .
has range
boolean

has timestampdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/core/hasTimestamp

is defined by
https://saref.etsi.org/saref4bldg/v1.1.2/
A relationship stating the timestamp of an entity (e.g. a measurement).

has characteristics: functional

has range
date time

has turbulatordp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/hasTurbulator

TRUE if the tube has a turbulator, FALSE if it does not.
has range
boolean

has valuedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/core/hasValue

is defined by
https://saref.etsi.org/core/
A relationship defining the value of a certain property, e.g., energy or power

heat transfer dimensiondp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/heatTransferDimension

Indicates how heat is transmitted according to the shape of the space heater.
has range
string

heat transfer mediumdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/heatTransferMedium

Enumeration defining the heat transfer medium if applicable.
has range
string

heat transfer type enumdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/heatTransferTypeEnum

Type of heat transfer between the two air streams.
has range
string

integrated lighting typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/integratedLightingType

Integrated lighting in cooled beam.
has range
string

internal controldp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/internalControl

Internal modulation control.
has range
string

is externaldp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/isExternal

Indication whether the element is designed for use in the exterior (TRUE) or not (FALSE). If (TRUE) it is an external element and faces the outside of the building.
has range
boolean

is free hangingdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/isFreeHanging

Is it free hanging type (not mounted in a false ceiling)?
has range
boolean

is guardeddp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/isGuarded

Indication of whether the motor enclosure is guarded (= TRUE) or not (= FALSE).
has range
boolean

is illuminateddp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/isIlluminated

An indication of whether there is an illuminated indicator to show that the switch is on (=TRUE) or not (= FALSE).
has range
boolean

is neutral primary terminal availabledp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/isNeutralPrimaryTerminalAvailable

An indication of whether the neutral point of the primary winding is available as a terminal (=TRUE) or not (= FALSE).
has range
boolean

is neutral secondary terminal availabledp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/isNeutralSecondaryTerminalAvailable

An indication of whether the neutral point of the secondary winding is available as a terminal (=TRUE) or not (= FALSE).
has range
boolean

is pluggable outletdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/isPluggableOutlet

Indication of whether the outlet accepts a loose plug connection (= TRUE) or whether it is directly connected (= FALSE) or whether the form of connection has not yet been determined (= UNKNOWN).
has range
boolean

is water storage heaterdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/isWaterStorageHeater

This is used to identify if the boiler has storage capacity (TRUE). If FALSE, then there is no storage capacity built into the boiler, such as an instantaneous hot water heater.
has range
boolean

lamp ballast typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/lampBallastType

The type of ballast used to stabilise gas discharge by limiting the current during operation and to deliver the necessary striking voltage for starting. Ballasts are needed to operate Discharge Lamps such as Fluorescent, Compact Fluorescent, High-pressure Mercury, Metal Halide and High-pressure Sodium Lamps. Magnetic ballasts are chokes which limit the current passing through a lamp connected in series on the principle of self-induction. The resultant current and power are decisive for the efficient operation of the lamp. A specially designed ballast is required for every type of lamp to comply with lamp rating in terms of Luminous Flux, Color Appearance and service life. The two types of magnetic ballasts for fluorescent lamps are KVG Conventional (EC-A series) and VVG Low-loss ballasts (EC-B series). Low-loss ballasts have a higher efficiency, which means reduced ballast losses and a lower thermal load. Electronic ballasts are used to run fluorescent lamps at high frequencies (approx. 35 - 40 kHz).
has range
string

lamp compensation typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/lampCompensationType

Identifies the form of compensation used for power factor correction and radio suppression.
has range
string

legenddp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/legend

A text inscribed or applied to the switch as a legend to indicate purpose or function.
has range
string

manual overridedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/manualOverride

Identifies whether hand-operated operation is provided as an override (= TRUE) or not (= FALSE). Note that this value should be set to FALSE by default in the case of a Hand Operated Actuator.
has range
boolean

mechanical operateddp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/mechanicalOperated

Indication whether the element is operated machanically (TRUE) or not, i.e. manually (FALSE).
has range
boolean

media sourcedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/mediaSource

Indicates media sources and corresponding names of ports (DistributionPort with FlowDirection=SINK and PredefinedType=AUDIOVISUAL) or aggregated audio/video components (AudioVisualAppliance).
has range
string

motor drive typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/motorDriveType

Motor drive type: DIRECTDRIVE: Direct drive. BELTDRIVE: Belt drive. COUPLING: Coupling. OTHER: Other type of motor drive. UNKNOWN: Unknown motor drive type.
has range
string

motor enclosure typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/motorEnclosureType

A list of the available types of motor enclosure from which that required may be selected.
has range
string

number of bladesdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/numberOfBlades

Number of blades.
has range
integer

number of cellsdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/numberOfCells

Number of cells in one cooling tower unit.
has range
integer

number of circuitsdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/numberOfCircuits

Number of parallel fluid tube circuits.
has range
integer

number of gangsdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/numberOfGangs

Number of gangs/buttons on this switch.
has range
integer

number of panelsdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/numberOfPanels

Number of panels.
has range
integer

number of rowsdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/numberOfRows

Number of tube rows in the tube bundle assembly.
has range
integer

number of sectionsdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/numberOfSections

Number of sections used.
has range
integer

number os socketsdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/numberOsSockets

The number of sockets that may be connected. In case of inconsistency, sockets defined on ports take precedence.
has range
integer

operating modedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/operatingMode

Identifies the operating mode of the boiler.
has range
string

operationdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/operation

The operational mechanism for the damper operation.
has range
string

orientationdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/orientation

The intended orientation for the damper as specified by the manufacturer.
has range
string

pattern typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/patternType

Defines the types of pattern (or shape of a tank that may be specified.
has range
string

pipe connection enumdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/pipeConnectionEnum

The manner in which the pipe connection is made to the cooled beam.
has range
string

placement typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/placementType

Indicates how the device is designed to be placed.
has range
string

power sourcedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/powerSource

Type of power driving the compressor.
has range
string

read out typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/readOutType

Indication of the form that readout from the meter takes. In the case of a dial read out, this may comprise multiple dials that give a cumulative reading and/or a mechanical odometer.
has range
string

refrigerant classdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/refrigerantClass

Refrigerant class used by the compressor. CFC: Chlorofluorocarbons. HCFC: Hydrochlorofluorocarbons. HFC: Hydrofluorocarbons.
has range
string

remote readingdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/remoteReading

Indicates whether the meter has a connection for remote reading through connection of a communication device (set TRUE) or not (set FALSE).
has range
boolean

roughnessdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/roughness

A measure of the vertical deviations of the surface.
has range
string

secondary current typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/secondaryCurrentType

A list of the secondary current types that can result from transformer output.
has range
string

shading device typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/shadingDeviceType

Specifies the type of shading device.
has range
string

spray typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/sprayType

SprayFilled: Water is sprayed into airflow. SplashTypeFill: water cascades over successive rows of splash bars. FilmTypeFill: water flows in a thin layer over closely spaced sheets.
has range
string

standarddp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/standard

The designation of the standard applicable for the definition of the characteristics of the unit.
has range
string

storage typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/storageType

Defines the general material category intended to be stored.
has range
string

switch functiondp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/switchFunction

Indicates types of switches which differs in functionality.
has range
string

temperature classificationdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/temperatureClassification

Enumeration defining the temperature classification of the space heater surface temperature. low temperature - surface temperature is relatively low, usually heated by hot water or electricity. high temperature - surface temperature is relatively high, usually heated by gas or steam.
has range
string

transformer vector groupdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/transformerVectorGroup

List of the possible vector groups for the transformer from which that required may be set. Values in the enumeration list follow a standard international code where the first letter describes how the primary windings are connected, the second letter describes how the secondary windings are connected, and the numbers describe the rotation of voltages and currents from the primary to the secondary side in multiples of 30 degrees. D: means that the windings are delta-connected. Y: means that the windings are star-connected. Z: means that the windings are zig-zag connected (a special start-connected providing low reactance of the transformer). The connectivity is only relevant for three-phase transformers.
has range
string

valve mechanismdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/valveMechanism

The mechanism by which the valve function is achieved where: BALL: Valve that has a ported ball that can be turned relative to the body seat ports. BUTTERFLY: Valve in which a streamlined disc pivots about a diametric axis. CONFIGUREDGATE: Screwdown valve in which the closing gate is shaped in a configured manner to have a more precise control of pressure and flow change across the valve. GLAND: Valve with a tapered seating, in which a rotatable plug is retained by means of a gland and gland packing. GLOBE: Screwdown valve that has a spherical body. LUBRICATEDPLUG: Plug valve in which a lubricant is injected under pressure between the plug face and the body. NEEDLE: Valve for regulating the flow in or from a pipe, in which a slender cone moves along the axis of flow to close against a fixed conical seat. PARALLELSLIDE: Screwdown valve that has a machined plate that slides in formed grooves to form a seal. PLUG: Valve that has a ported plug that can be turned relative to the body seat ports. WEDGEGATE: Screwdown valve that has a wedge shaped plate fitting into tapered guides to form a seal.
has range
string

valve operationdp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/valveOperation

The method of valve operation where: DROPWEIGHT: A valve that is closed by the action of a weighted lever being released, the weight normally being prevented from dropping by being held by a wire, the closure normally being made by the action of heat on a fusible link in the wire FLOAT: A valve that is opened and closed by the action of a float that rises and falls with water level. The float may be a ball attached to a lever or other mechanism HYDRAULIC: A valve that is opened and closed by hydraulic actuation LEVER: A valve that is opened and closed by the action of a lever rotating the gate within the valve. LOCKSHIELD: A valve that requires the use of a special lockshield key for opening and closing, the operating mechanism being protected by a shroud during normal operation. MOTORIZED: A valve that is opened and closed by the action of an electric motor on an actuator PNEUMATIC: A valve that is opened and closed by pneumatic actuation SOLENOID: A valve that is normally held open by a magnetic field in a coil acting on the gate but that is closed immediately if the electrical current generating the magnetic field is removed. SPRING: A valve that is normally held in position by the pressure of a spring on a plate but that may be caused to open if the pressure of the fluid is sufficient to overcome the spring pressure. THERMOSTATIC: A valve in which the ports are opened or closed to maintain a required predetermined temperature. WHEEL: A valve that is opened and closed by the action of a wheel moving the gate within the valve.
has range
string

valve patterndp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/valvePattern

The configuration of the ports of a valve according to either the linear route taken by a fluid flowing through the valve or by the number of ports where: SINGLEPORT: Valve that has a single entry port from the system that it serves, the exit port being to the surrounding environment. ANGLED_2_PORT: Valve in which the direction of flow is changed through 90 degrees. STRAIGHT_2_PORT: Valve in which the flow is straight through. STRAIGHT_3_PORT: Valve with three separate ports. CROSSOVER_4_PORT: Valve with 4 separate ports.
has range
string

water flow control system typedp back to ToC or Data Property ToC

IRI: https://saref.etsi.org/saref4bldg/waterFlowControlSystemType

Factory fitted waterflow control system.
has range
string

Annotation Properties

creatorap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/creator

date copyrightedap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/dateCopyrighted

descriptionap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/description

had primary sourceap back to ToC or Annotation Property ToC

IRI: http://www.w3.org/ns/prov#hadPrimarySource

issuedap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/issued

licenseap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/license

modifiedap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/modified

preferred namespace prefixap back to ToC or Annotation Property ToC

IRI: http://purl.org/vocab/vann/preferredNamespacePrefix

preferred namespace uriap back to ToC or Annotation Property ToC

IRI: http://purl.org/vocab/vann/preferredNamespaceUri

publisherap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/publisher

rights holderap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/rightsHolder

sourceap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/source

titleap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/title

Namespace Declarations back to ToC

default namespace
https://saref.etsi.org/saref4bldg/
01-01-02-60
https://www.etsi.org/deliver/etsi_ts/103400_103499/10341003/01.01.02_60/
core
https://saref.etsi.org/core/
foaf-rdf
http://www.garcia-castro.com/foaf.rdf#
forge-etsi-org
https://forge.etsi.org/
ifc4-add1
https://w3id.org/ifc/IFC4_ADD1#
lexical
http://www.buildingsmart-tech.org/ifc/IFC4/Add1/html/schema/ifcbuildingcontrolsdomain/lexical/
net
http://purl.org/net/
owl
http://www.w3.org/2002/07/owl#
prov
http://www.w3.org/ns/prov#
pset
http://www.buildingsmart-tech.org/ifc/IFC4/Add1/html/schema/ifcbuildingcontrolsdomain/pset/
rdf
http://www.w3.org/1999/02/22-rdf-syntax-ns#
rdfs
http://www.w3.org/2000/01/rdf-schema#
terms
http://purl.org/dc/terms/
vann
http://purl.org/vocab/vann/
wgs84-pos
http://www.w3.org/2003/01/geo/wgs84_pos#
xsd
http://www.w3.org/2001/XMLSchema#

This HTML document was obtained by processing the OWL ontology source code through LODE, Live OWL Documentation Environment, developed by Silvio Peroni.