StahlDigital Vocabulary

IRI:
https://w3id.org/steel/ProcessOntology
Date :
28T17:24:03+00:00/03/2024
Current version :
0.1 (preliminary)
Other visualisation :
Ontology source - WebVowl

Table of Content

  1. Introduction
  2. Classes
  3. Object Properties
  4. Data Properties
  5. Named Individuals
  6. Annotation Properties
  7. Namespace Declarations

Introduction

Vocabulary of project StahlDigital

Classes

Abaqusc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Abaqus

Simulation Software named Abaqus
has super-classes
Solverc

Benchmarkc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Benchmark

bulge testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/BulgeTest

Chemical Compositionc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/ChemicalComposition

Coatingc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Coating

Thing that you put on the surface of a specimen that influences the surface behaviour

Codec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Code

A external general simulation program. e.g. DAMASK or LAMMPS. A Code gets executed by a job
has sub-classes
Damask codec, Simulation Codec
is in domain of
has inputop, has outputop, versiondp
is in range of
uses Codeop

Colorc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Color

A Color, Green, Yellow, etc..

Componentc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Component

Component testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/ComponentTest

contact lengthc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/contactLength

Coordinate systemc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/CoordinateSystem

Crash Testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/CrashTest

Crystollography Texturec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/CrystallographyTexture

Damagec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Damage

Damask codec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/DamaskCode

has super-classes
Codec

Deformationc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Deformation

Digital workflowc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/DigitalWorkflow

Definition in the Workflow Group: "A workflow is a chain of well-documented process steps to create or handle data for a specific problem in order to deliver a particular set of outputs." or "chain of steps"
has super-classes
Workflowc
is in domain of
has Stepop

draughtc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/draught

ductile failurec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/DuctileFailure

ductilityc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Ductility

Elasticityc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Elasticity

Elementc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Element

Chemical Elements

Experimentc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Experiment

Experimental testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/ExperimentalTest

Suclasses like Tensile Test
has sub-classes
Nakajima Testc

Experimental workflowc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/ExperimentalWorkflow

has super-classes
Workflowc

failurec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Failure

Feedback Loopc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FeedbackLoop

Filec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/CodeFileRessource

file input or output of a job
has super-classes
Resourcec
is in domain of
uridp

final flow stress ginfc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FinalFlowStress_ginf

DAMASK phenopower law parameter

final thicknessc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FinalThickness

flat rollingc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FlatRolling

flow stress exponent ac back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FlowStressExponent_a

DAMASK phenopower law parameter

Fluid solid transitionc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FluidSolidTransition

Fracture Strainc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FractureStrain

Fracture Stressc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FractureStress

frame of materialc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FrameOfMaterial

Frame of referencec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/FrameOfReference

Geometryc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Geometry

Grainc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Grain

grain boundariesc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/GrainBoundaries

need at least two grains

grain orientationc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/GrainOrientation

Grain sizec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/GrainSize

hardening modulus h0c back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/HardeningModulus_h0

DAMASK phenopower law parameter

HDF5 File Formatc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/HDF5

is in range of
has hdfop

Hockett Sherby Parameter Nc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/HockettSherbyParameterN

Material parameter N used for the flow curve extrapolation according to Hockett and Sherby (1975).

Hockett Sherby Parameter pc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/HockettSherbyParameterP

Material parameter p used for the flow curve extrapolation according to Hockett and Sherby (1975).

Hockett Sherby Steady State Stressc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/HockettSherbySteadyStateStress

Steady-state flow stress used for the flow curve extrapolation according to Hockett and Sherby (1975).

Hockett Sherby Yield Stressc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/HockettSherbyYieldStress

Yield stress used for the flow curve extrapolation according to Hockett and Sherby (1975).

initial flow stress g0c back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/InitialFlowStress_g0

DAMASK phenopower law parameter

Jobc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Job

is in domain of
start timedp, uses Codeop

LSDynac back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Lsdyna

Simulation Software named LSDyna
has super-classes
Solverc

Mega Pascal per Secondc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/MegaPA-PER-SEC

Stress rate, e.g. referenced by tensile tests

Microstructurec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Microstructure

Modelc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Model

Morphological Texturec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/MorphologicalTexture

Nakajima Testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/NakajimaTest

has super-classes
Experimental testc

normal directionc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/normalDirection

number of passesc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/numberOfPasses

Percipationc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Precipitation

Phasec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Phase

Region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform (Wikipedia)

Phase Boundaryc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/PhaseBoundary

Plasticityc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Plasticity

Process chain simulationc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/processChainSimulation

Property of structural relevancec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/PropertyOfStructuralRelevance

Properties that contribute towards the structural integrity of a component. Example Thickness, negative example Paint/ Color of Paint

Pyiron Jobc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/PyironJob

execution information of a Code; can get deferred; can get executed on a batch system. A Pyiron job bundles all required metadata for a Pyiron code execution. Is similar to the context of a process from computer science.
has super-classes
processc
has sub-classes
Reference Jobc, Script Jobc
is in domain of
has a sub jobop, has hdfop
is in range of
has a sub jobop, has jobop

Pyiron job inputc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/JobInput

the input parameter for a pyiron job
has super-classes
Resourcec

Pyiron job metadatac back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/JobMetadata

each pyiron job has some metadata which is stored in the central sql database

Pyiron job outputc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/JobOutput

the output parameter for a pyiron job

Pyiron notebookc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/PyironNotebook

Jupyter Pyiron Notebook

Pyiron projectc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/PyironProject

A frame where all pyiron jobs are done on top of this frame. It encloses a number of jobs. It also provides utility functions for creatig python objects for these jobs.
is in domain of
has jobop

Reference Jobc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/ReferenceJob

a Pyiron job for ...
has super-classes
Pyiron Jobc

Resourcec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/CodeRessource

Input or output of a job
has sub-classes
Filec, Pyiron job inputc
is in range of
has inputop

roll gapc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/rollGap

rolling directionc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/rollingDirection

rolling forcec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/rollingForce

rolling millc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/RollingMill

rolling schedulec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/rollingSchedule

rolling speedc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/rollingSpeed

Script Jobc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/ScriptJob

a Pyiron job for executing a script like e.g. JupyterNotebook
has super-classes
Pyiron Jobc

Shear Testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/ShearTest

Simulationc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Simulation

Simulation Codec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/SimulationCode

has super-classes
Codec

Simulation Workflowc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/SimulationWorkflow

has super-classes
Workflowc

Solverc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Solver

A software for solving compelex lin-diff equations, Like Abaqus or Lsdyna
has sub-classes
Abaqusc, LSDynac

standc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/stand

Standardc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Standard

Standard as described by ISO / DIN / etc
is in range of
has standardop

stress exponent nc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/StressExponent_n

DAMASK phenopower law parameter

stripc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Strip

strip tensionc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/stripTension

strip widthc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/stripWidth

Tensile Testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/TensileTest

Testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Test

like Tensile Test etc, maybe an experiment
is in domain of
has project nameop, has project numberop, has test propertyop, has testing facilityop

Testing machinec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/TestingMachine

A machine pervorming an experimental test

time increment stepc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/TimeIncrementStep

Time seriesc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/TimeSeries

Time series simulationc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/TimeSeriesSimulation

A Simulation that return a time Series

Total Elongationc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/TotalElongation

transverse directionc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/transverseDirection

Ultimate Tensile Strengthc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/UltimateTensileStrength

Unusual crash testc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/UnusualCrashTest

Crashtestresults that differ from simulations

Unusual resultc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/UnusualResult

Exeriment result that differs from a given simulation result, or the other way round.

Validationc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Validation

work roll diameterc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/workRollDiameter

Workflowc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/Workflow

has sub-classes
Digital workflowc, Experimental workflowc, Simulation Workflowc
is in domain of
environmentdp, executedBydp, inputdp, metadatadp, outputdp, parametersdp, sequencedp, stepsdp

Workflow stepc back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/WorkflowStep

a part of a workflow
is in range of
has Stepop

Yield surfacec back to ToC or Class ToC

IRI: https://w3id.org/steel/ProcessOntology/YieldSurface

Object Properties

has a sub jobop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSubJob

has domain
Pyiron Jobc
has range
Pyiron Jobc

has hdfop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHDF

has domain
Pyiron Jobc
has range
HDF5 File Formatc
The pyiron jobs has hdf5 file

has inputop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInput

has domain
Codec
has range
Resourcec
input ressource for a Code

has jobop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasJob

has domain
Pyiron projectc
has range
Pyiron Jobc
The relation between pyiron project and jobs

has outputop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOutput

has domain
Codec
output of a code

has project nameop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProjectName

has domain
Testc
has range
ProjectNamec
is also defined as
data property

has project numberop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProjectNumber

has domain
Testc
has range
ProjectNumberc
is also defined as
data property

has standardop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStandard

has range
Standardc
the related standard (ISO / DIN / etc)

has Stepop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStep

has domain
Digital workflowc
has range
Workflow stepc
The relation between digital workflows and workflow steps

has test propertyop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestProperty

has domain
Testc
super property for all test properties

has testing facilityop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestingFacility

has domain
Testc
has range
TestingFacilityc
is also defined as
data property

hasAbsoluteCrossheadTravelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAbsoluteCrossheadTravelObject

has range
AbsoluteCrossheadTravelc

hasAmplitudeFileop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAmplitudeFileObject

has range
AmplitudeFilec

hasAnisotropicYieldFunctionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunctionObject

has range
AnisotropicYieldFunctionc

hasAnisotropicYieldFunctionParametersop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunctionParametersObject

has range
AnisotropicYieldFunctionParametersc

hasBatchNumberop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBatchNumberObject

has range
BatchNumberc

hasBiaxialStressop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBiaxialStressObject

has range
BiaxialStressc

hasBlankHolderForceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBlankHolderForceObject

has range
BlankHolderForcec

hasBoundaryFileop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBoundaryFileObject

has range
BoundaryFilec

hasCalibrationComponentsop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCalibrationComponentsObject

has range
CalibrationComponentsc

hasCalibrationStatusop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCalibrationStatusObject

has range
CalibrationStatusc

hasCameraSystemop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCameraSystemObject

has range
CameraSystemc

hasCharacteristicEngineeringStrainRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCharacteristicEngineeringStrainRateObject

has range
CharacteristicEngineeringStrainRatec

hasClampingop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasClampingObject

has range
Clampingc

hasClampingForceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasClampingForceObject

has range
ClampingForcec

hasCoefficientOfCorrelationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCoefficientOfCorrelationObject

has range
CoefficientOfCorrelationc

hasComplexPhaseSteelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasComplexPhaseSteelObject

has range
ComplexPhaseSteelc

hasCompositionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCompositionObject

has range
Compositionc

hasComputerControlledTensileTestingMachineop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasComputerControlledTensileTestingMachineObject

has range
ComputerControlledTensileTestingMachinec

hasCrossheadDisplacementop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrossheadDisplacementObject

has range
CrossheadDisplacementc

hasCrossheadSeparationRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrossheadSeparationRateObject

has range
CrossheadSeparationRatec

hasCrystalPlasticityConstitutiveModelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityConstitutiveModelObject

has range
CrystalPlasticityConstitutiveModelc

hasCrystalPlasticityParameterFileop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityParameterFileObject

has range
CrystalPlasticityParameterFilec

hasDamageExponentop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDamageExponent

has range
DamageExponentc

hasDamageThresholdop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDamageThreshold

has range
DamageThresholdc

hasDamageTreatmentop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDamageTreatment

has range
DamageTreatmentc

hasDataSamplingFrequencyop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDataSamplingFrequencyObject

has range
DataSamplingFrequencyc

hasDefaultValueop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDefaultValueObject

has range
DefaultValuec

hasDeliveryDateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDeliveryDateObject

has range
DeliveryDatec

hasDiameterop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameterObject

has range
Diameterc

hasDiameterAfterFracture1op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture1Object

has range
DiameterAfterFracture1c

hasDiameterAfterFracture2op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture2Object

has range
DiameterAfterFracture2c

hasDieToolop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDieToolObject

has range
DieToolc

hasDiscretizationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiscretizationObject

has range
Discretizationc

hasDisplacementop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDisplacementObject

has range
Displacementc

hasDisplacementTransducerop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDisplacementTransducerObject

has range
DisplacementTransducerc

hasDrawingSpeedop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDrawingSpeedObject

has range
DrawingSpeedc

hasDualPhaseSteelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDualPhaseSteelObject

has range
DualPhaseSteelc

hasDX56Dop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDX56DObject

has range
DX56Dc

hasDynamometerAreaop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDynamometerAreaObject

has range
DynamometerAreac

hasEbsdFileNameop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEbsdFileNameObject

has range
EbsdFileNamec

hasEffecticStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEffecticStrainObject

has range
EffecticStrainc

hasEffectiveStressop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEffectiveStressObject

has range
EffectiveStressc

hasElasticConstantC11op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC11Object

has range
ElasticConstantC11c

hasElasticConstantC12op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC12Object

has range
ElasticConstantC12c

hasElasticConstantC44op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC44Object

has range
ElasticConstantC44c

hasElastoplasticModelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElastoplasticModel

has range
ElastoplasticModelc

hasElementDeletionFlagop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElementDeletionFlag

has range
ElementDeletionFlagc

hasElementDeletionTreatmentop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElementDeletionTreatment

has range
ElementDeletionTreatmentc

hasElongationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElongationObject

has range
Elongationc

hasEngineeringStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEngineeringStrainObject

has range
EngineeringStrainc

hasEngineeringStressop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEngineeringStressObject

has range
EngineeringStressc

hasEstimatedStrainRateOverTheParallelLengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEstimatedStrainRateOverTheParallelLengthObject

has range
EstimatedStrainRateOverTheParallelLengthc

hasEulerAngle1op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEulerAngle1Object

has range
EulerAngle1c

hasEulerAngle2op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEulerAngle2Object

has range
EulerAngle2c

hasEulerAngle3op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEulerAngle3Object

has range
EulerAngle3c

hasEulerAngleConventionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEulerAngleConventionObject

has range
EulerAngleConventionc

hasEvaluationMethodop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEvaluationMethodObject

has range
EvaluationMethodc

hasExperimentIdentifierop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExperimentIdentifierObject

has range
ExperimentIdentifierc

hasExtensionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensionObject

has range
Extensionc

hasExtensionAtFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensionAtFractureObject

has range
ExtensionAtFracturec

hasExtensionMeasuringSystemop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensionMeasuringSystemObject

has range
ExtensionMeasuringSystemc

hasExtensometerGaugeLengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensometerGaugeLengthObject

has range
ExtensometerGaugeLengthc

hasFadingExponentop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFadingExponent

has range
FadingExponentc

hasFailureCriteriaTypeAddop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd

has range
FailureCriteriaTypeAddc

hasFailureCriteriaTypeAdd4ElementDeletionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd4ElementDeletion

has range
FailureCriteriaTypeAdd4ElementDeletionc

hasFailureCriteriaTypeAdd4StrainAverageop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureCriteriaTypeAdd4StrainAverage

has range
FailureCriteriaTypeAdd4StrainAveragec

hasFailureStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureStrain

has range
FailureStrainc

hasFailureStrainIdentifierop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureStrainIdentifier

has range
FailureStrainIdentifierc

hasFailureStrainIdentifier4MeshDependencyop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureStrainIdentifier4MeshDependency

has range
FailureStrainIdentifier4MeshDependencyc

hasFailureStrainIdentifier4StrainRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureStrainIdentifier4StrainRate

has range
FailureStrainIdentifier4StrainRatec

hasFailureStrainIdentifier4Temperatureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureStrainIdentifier4Temperature

has range
FailureStrainIdentifier4Temperaturec

hasFailureTreatmentop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFailureTreatment

has range
FailureTreatmentc

hasFEMSolverop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFEMSolverObject

has range
FEMSolverc

hasFinalGaugeLengthAfterFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFinalGaugeLengthAfterFractureObject

has range
FinalGaugeLengthAfterFracturec

hasFLCDeterminationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFLCDeterminationObject

has range
FLCDeterminationc

hasForceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForceObject

has range
Forcec

hasForceAtFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForceAtFractureObject

has range
ForceAtFracturec

hasForceMeasuringDeviceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForceMeasuringDeviceObject

has range
ForceMeasuringDevicec

hasForceMeasuringSystemop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForceMeasuringSystemObject

has range
ForceMeasuringSystemc

hasFormingLimitCurveop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFormingLimitCurveObject

has range
FormingLimitCurvec

hasFormingLimitDiagramop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFormingLimitDiagramObject

has range
FormingLimitDiagramc

hasFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFractureObject

has range
Fracturec

hasFrameRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFrameRateObject

has range
FrameRatec

hasGaugeLengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGaugeLengthObject

has range
GaugeLengthc

hasGradeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGradeObject

has range
Gradec

hasGrainNumberop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGrainNumberObject

has range
GrainNumberc

hasGridop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGridObject

has range
Gridc

hasGridSizeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGridSizeObject

has range
GridSizec

hasHardeningCurveop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningCurveObject

has range
HardeningCurvec

hasHardeningLawop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningLawObject

has range
HardeningLawc

hasHardeningParameterTau0op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau0Object

has range
HardeningParameterTau0c

hasHardeningParameterTau1op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau1Object

has range
HardeningParameterTau1c

hasHardeningParameterTheta0op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta0Object

has range
HardeningParameterTheta0c

hasHardeningParameterTheta1op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta1Object

has range
HardeningParameterTheta1c

hasHCT980Cop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHCT980CObject

has range
HCT980Cc

hasHCT980Xop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHCT980XObject

has range
HCT980Xc

hasHX340LADop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHX340LADObject

has range
HX340LADc

hasInitialDisplacementRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialDisplacementRateObject

has range
InitialDisplacementRatec

hasInitialSheetThicknessop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialSheetThicknessObject

has range
InitialSheetThicknessc

hasInitialThicknessop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialThicknessObject

has range
InitialThicknessc

hasInnerDiameterBlankHolderop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInnerDiameterBlankHolderObject

has range
InnerDiameterBlankHolderc

hasInnerDiameterDieop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInnerDiameterDieObject

has range
InnerDiameterDiec

hasInteractionMatrixop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInteractionMatrixObject

has range
InteractionMatrixc

hasInventoryNumberop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInventoryNumberObject

has range
InventoryNumberc

hasLaboratoryop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLaboratoryObject

has range
Laboratoryc

hasLatentHardeningQ0op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ0Object

has range
LatentHardeningQ0c

hasLatentHardeningQ1op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ1Object

has range
LatentHardeningQ1c

hasLatticeStructureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLatticeStructureObject

has range
LatticeStructurec

hasLocationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLocationObject

has range
Locationc

hasLowerYieldStrengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLowerYieldStrengthObject

has range
LowerYieldStrengthc

hasLubricationSystemop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLubricationSystemObject

has range
LubricationSystemc

hasMachineop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMachineObject

has range
Machinec

hasMajorTrueStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMajorTrueStrainObject

has range
MajorTrueStrainc

hasMassDensityop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMassDensity

has range
MassDensityc

hasMAT_ADD_DAMAGE_GISSMOop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMAT_ADD_DAMAGE_GISSMO

has range
MAT_ADD_DAMAGE_GISSMOc

hasMaterialop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaterialObject

has range
Materialc

hasMaterialCardop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaterialCardObject

has range
Material Cardc

hasMaterialClassop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaterialClassObject

has range
MaterialClassc

hasMaterialIdentifierop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaterialIdentifier

has range
MaterialIdentifierc

hasMaterialInstabilityStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaterialInstabilityStrain

has range
MaterialInstabilityStrainc

hasMatPiecewiseLinearPlasticityop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMatPiecewiseLinearPlasticity

has range
MatPiecewiseLinearPlasticityc

hasMatPiecewiseLinearPlasticityLogInterpolationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMatPiecewiseLinearPlasticityLogInterpolation

has range
MatPiecewiseLinearPlasticityLogInterpolationc

hasMatTabulatedJohnsonCookop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMatTabulatedJohnsonCook

has range
MatTabulatedJohnsonCookc

hasMatTabulatedJohnsonCookLogInterpolationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMatTabulatedJohnsonCookLogInterpolation

has range
MatTabulatedJohnsonCookLogInterpolationc

hasMaximumForceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForceObject

has range
MaximumForcec

hasMaximumForceDiscontinousYieldingop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForceDiscontinousYieldingObject

has range
MaximumForceDiscontinousYieldingc

hasMaximumForceNoDiscontinousYieldingop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForceNoDiscontinousYieldingObject

has range
MaximumForceNoDiscontinousYieldingc

hasMaximumSpeedop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumSpeedObject

has range
MaximumSpeedc

hasMeanEngineeringStrainRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeanEngineeringStrainRateObject

has range
MeanEngineeringStrainRatec

hasMeanPlasticStrainRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeanPlasticStrainRateObject

has range
MeanPlasticStrainRatec

hasMeasuringAidop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeasuringAidObject

has range
MeasuringAidc

hasMeasuringDeviceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeasuringDeviceObject

has range
MeasuringDevicec

hasMeasuringRangeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeasuringRangeObject

has range
MeasuringRangec

hasMicroalloyedSteelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMicroalloyedSteelObject

has range
MicroalloyedSteelc

hasMicrostructureModelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMicrostructureModelObject

has range
MicrostructureModelc

hasMildSteelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMildSteelObject

has range
MildSteelc

hasMinimumCrossSectionAfterFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinimumCrossSectionAfterFractureObject

has range
MinimumCrossSectionAfterFracturec

hasMinimumCrosssectionAfterFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinimumCrosssectionAfterFractureObject

has range
MinimumCrosssectionAfterFracturec

hasMinorTrueStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinorTrueStrainObject

has range
MinorTrueStrainc

hasMinTimeStep4ElementDelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinTimeStep4ElementDel

has range
MinTimeStep4ElementDelc

hasModulusOfElasticityop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasModulusOfElasticityObject

has range
ModulusOfElasticityc

hasNominalEngineeringStrainRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNominalEngineeringStrainRateObject

has range
NominalEngineeringStrainRatec

hasNotchTensileStrengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNotchTensileStrengthObject

has range
NotchTensileStrengthc

hasNumberFailedIntegrationPointsop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNumberFailedIntegrationPoints

has range
NumberFailedIntegrationPointsc

hasNumberGrainsop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNumberGrainsObject

has range
NumberGrainsc

hasNumberOfVirtualExperimentsop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNumberOfVirtualExperimentsObject

has range
NumberOfVirtualExperimentsc

hasOperatorop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOperatorObject

has range
Operatorc

hasOriginalCrossSectionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalCrossSectionObject

has range
OriginalCrossSectionc

hasOriginalCrosssectionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalCrosssectionObject

has range
OriginalCrosssectionc

hasOriginalDiameterop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalDiameterObject

has range
OriginalDiameterc

hasOriginalGaugeLengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalGaugeLengthObject

has range
OriginalGaugeLengthc

hasOriginalThicknessop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalThicknessObject

has range
OriginalThicknessc

hasOriginalWidthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalWidthObject

has range
OriginalWidthc

hasParallelLengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasParallelLengthObject

has range
ParallelLengthc

hasPercentageElongationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageElongationObject

has range
PercentageElongationc

hasPercentageElongationAfterFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageElongationAfterFractureObject

has range
PercentageElongationAfterFracturec

hasPercentageExtensionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageExtensionObject

has range
PercentageExtensionc

hasPercentagePermanentElongationop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePermanentElongationObject

has range
PercentagePermanentElongationc

hasPercentagePermanentExtensionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtensionObject

has range
PercentagePermanentExtensionc

hasPercentagePlasticExtensionAtMaximumForceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePlasticExtensionAtMaximumForceObject

has range
PercentagePlasticExtensionAtMaximumForcec

hasPercentageReductionOfAreaop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageReductionOfAreaObject

has range
PercentageReductionOfAreac

hasPercentageTotalExtensionAtFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtFractureObject

has range
PercentageTotalExtensionAtFracturec

hasPercentageTotalExtensionAtMaximumForceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtMaximumForceObject

has range
PercentageTotalExtensionAtMaximumForcec

hasPercentageYieldPointExtensionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageYieldPointExtensionObject

has range
PercentageYieldPointExtensionc

hasPermanentSetStrengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPermanentSetStrengthObject

has range
PermanentSetStrengthc

hasPistonSpeedop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPistonSpeedObject

has range
PistonSpeedc

hasPlasticEngineeringStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPlasticEngineeringStrainObject

has range
PlasticEngineeringStrainc

hasPoissonRatioop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPoissonRatio

has range
PoissonRatioc

hasPoissonsRatioop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPoissonsRatioObject

has range
PoissonsRatioc

hasPostProcessingSoftwareop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPostProcessingSoftwareObject

has range
PostProcessingSoftwarec

hasPreliminaryForceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPreliminaryForceObject

has range
PreliminaryForcec

hasPressureChamberop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPressureChamberObject

has range
PressureChamberc

hasPrincipalStressLimit4PostProcessingop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPrincipalStressLimit4PostProcessing

has range
PrincipalStressLimit4PostProcessingc

hasProjectNameop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProjectNameObject

has range
ProjectNamec

hasProjectNumberop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProjectNumberObject

has range
ProjectNumberc

hasProofStrength_0.2Percentageop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrength_0.2PercentageObject

has range
ProofStrength_0.2Percentagec

hasProofStrength_1Percentageop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrength_1PercentageObject

has range
ProofStrength_1Percentagec

hasProofStrengthPlasticExtensionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrengthPlasticExtensionObject

has range
ProofStrengthPlasticExtensionc

hasProofStrengthTotalExtensionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrengthTotalExtensionObject

has range
ProofStrengthTotalExtensionc

hasPunchDiameterop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchDiameterObject

has range
PunchDiameterc

hasPunchDisplacementop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchDisplacementObject

has range
PunchDisplacementc

hasPunchVelocityop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchVelocityObject

has range
PunchVelocityc

hasRadiusop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadiusObject

has range
Radiusc

hasRadiusCurvatureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadiusCurvatureObject

has range
RadiusCurvaturec

hasRadiusDieop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadiusDieObject

has range
RadiusDiec

hasRateSensitivityOfSlipop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRateSensitivityOfSlipObject

has range
RateSensitivityOfSlipc

hasReferenceElementSizeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasReferenceElementSize

has range
ReferenceElementSizec

hasReferenceShearRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasReferenceShearRateObject

has range
ReferenceShearRatec

hasReferenceTemperatureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasReferenceTemperature

has range
ReferenceTemperaturec

hasRelativeStandardDeviationOfTheSlopeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRelativeStandardDeviationOfTheSlopeObject

has range
RelativeStandardDeviationOfTheSlopec

hasRemarkop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRemarkObject

has range
Remarkc

hasResultsFileop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasResultsFileObject

has range
ResultsFilec

hasRollingDirectionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRollingDirectionObject

has range
RollingDirectionc

hasRValueop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRValueObject

has range
RValuec

hasSampleCodeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSampleCodeObject

has range
SampleCodec

hasSampleIdentifierop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSampleIdentifierObject

has range
SampleIdentifierc

hasSampleIdentifier-2op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSampleIdentifier-2Object

has range
SampleIdentifier-2c

hasSerialNumberop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSerialNumberObject

has range
SerialNumberc

hasShearLengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLengthObject

has range
ShearLengthc

hasShearLengthAfterFracture1op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture1Object

has range
ShearLengthAfterFracture1c

hasShearLengthAfterFracture2op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture2Object

has range
ShearLengthAfterFracture2c

hasShearStrengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearStrengthObject

has range
ShearStrengthc

hasSheetThicknessop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSheetThicknessObject

has range
Sheet thicknessc

hasSlipSystemNumberop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSlipSystemNumberObject

has range
SlipSystemNumberc

hasSlopeElasticPartStressStrainCurveop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSlopeElasticPartStressStrainCurveObject

has range
SlopeElasticPartStressStrainCurvec

hasSoftwareop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSoftwareObject

has range
Softwarec

hasSpecificHeatCapacityop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSpecificHeatCapacity

has range
SpecificHeatCapacityc

hasSpecificPlasticWorkop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWorkObject

has range
SpecificPlasticWorkc

hasSpecificPlasticWorkValueop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWorkValueObject

has range
SpecificPlasticWorkValuec

hasSpecimenWidthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSpecimenWidthObject

has range
SpecimenWidthc

hasStandardDeviationOfTheSlopeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStandardDeviationOfTheSlopeObject

has range
StandardDeviationOfTheSlopec

hasSteelop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSteelObject

has range
Steelc

hasStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainObject

has range
Strainc

hasStrainRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainRateObject

has range
StrainRatec

hasStrainRateFormulationFlagop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainRateFormulationFlag

has range
StrainRateFormulationFlagc

hasStrainRateScaleIdendifierop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainRateScaleIdendifier

has range
StrainRateScaleIdendifierc

hasStrainRateScaleParameterCop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainRateScaleParameterC

has range
StrainRateScaleParameterCc

hasStrainRateScaleParameterPop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainRateScaleParameterP

has range
StrainRateScaleParameterPc

hasStressop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStressObject

has range
Stressc

hasStressRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStressRateObject

has range
StressRatec

hasSupplierop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSupplierObject

has range
Supplierc

hasTangentYieldModulusop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTangentYieldModulus

has range
TangentYieldModulusc

hasTargetClampingForceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTargetClampingForceObject

has range
TargetClampingForcec

hasTaylorQuinneyCoefficientop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTaylorQuinneyCoefficient

has range
TaylorQuinneyCoefficientc

hasTensileStrengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTensileStrengthObject

has range
TensileStrengthc

hasTensileTestingMachineop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTensileTestingMachineObject

has range
TensileTestingMachinec

hasTestDirectionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestDirectionObject

has range
TestDirectionc

hasTesterop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTesterObject

has range
Testerc

hasTestingDirectionop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestingDirectionObject

has range
TestingDirectionc

hasTestingFacilityop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestingFacilityObject

has range
TestingFacilityc

hasTestingRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestingRateObject

has range
TestingRatec

hasTestPieceop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestPieceObject

has range
Test piecec

hasTestPieceGeometryop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestPieceGeometryObject

has range
TestPieceGeometryc

hasTestPieceLengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestPieceLengthObject

has range
TestPieceLengthc

hasTestStandardop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestStandardObject

has range
TestStandardc

hasTestTemperaturop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestTemperaturObject

has range
TestTemperaturc

hasTestTemperatureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestTemperatureObject

has range
TestTemperaturec

hasTestTimeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestTimeObject

has range
TestTimec

hasTextureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTextureObject

has range
Texturec

hasThicknessAfterFracture1op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture1Object

has range
ThicknessAfterFracture1c

hasThicknessAfterFracture2op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture2Object

has range
ThicknessAfterFracture2c

hasTimeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTimeObject

has range
Timec

hasTimeDependentEngineeringStrainRateop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTimeDependentEngineeringStrainRateObject

has range
TimeDependentEngineeringStrainRatec

hasTimeStampop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTimeStampObject

has range
TimeStampc

hasTotalEngineeringStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTotalEngineeringStrainObject

has range
TotalEngineeringStrainc

hasTotalLengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTotalLengthObject

has range
TotalLengthc

hasTransitionRadiusop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTransitionRadiusObject

has range
TransitionRadiusc

hasTrueFractureStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueFractureStrainObject

has range
TrueFractureStrainc

hasTrueFractureStressop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueFractureStressObject

has range
TrueFractureStressc

hasTruePlasticStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTruePlasticStrainObject

has range
TruePlasticStrainc

hasTruePlasticStrainAtFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTruePlasticStrainAtFractureObject

has range
TruePlasticStrainAtFracturec

hasTruePlasticThicknessStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTruePlasticThicknessStrainObject

has range
TruePlasticThicknessStrainc

hasTrueStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStrainObject

has range
True Strainc

hasTrueStressop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStressObject

has range
True Stressc

hasTrueStressAtFractureop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStressAtFractureObject

has range
TrueStressAtFracturec

hasTrueThicknessStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueThicknessStrainObject

has range
TrueThicknessStrainc

hasTrueTotalStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueTotalStrainObject

has range
TrueTotalStrainc

hasTrueWidthStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueWidthStrainObject

has range
TrueWidthStrainc

hasUpperYieldStrengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasUpperYieldStrengthObject

has range
UpperYieldStrengthc

hasUserop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasUserObject

has range
Userc

hasWidthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthObject

has range
Widthc

hasWidthAfterFracture1op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture1Object

has range
WidthAfterFracture1c

hasWidthAfterFracture2op back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture2Object

has range
WidthAfterFracture2c

hasWidthChangeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthChangeObject

has range
WidthChangec

hasWidthStrainop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthStrainObject

has range
WidthStrainc

hasWorkop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWorkObject

has range
Workc

hasYieldForce_0.2Percentageop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldForce_0.2PercentageObject

has range
YieldForce_0.2Percentagec

hasYieldingIdentifierop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldingIdentifier

has range
YieldingIdentifierc

hasYieldingIdentifierIsoThermalop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldingIdentifierIsoThermal

has range
YieldingIdentifierIsoThermalc

hasYieldStrengthop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldStrengthObject

has range
YieldStrengthc

hasYieldStressop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldStress

has range
Yield Stressc

hasYoungsModulusop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYoungsModulus

has range
YoungsModulusc

is related toop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/related

some things are related

uses Codeop back to ToC or Object Property ToC

IRI: https://w3id.org/steel/ProcessOntology/usesCode

has domain
Jobc
has range
Codec
code used by a job

Data Properties

environmentdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/environment

has domain
Workflowc

executedBydp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/executedBy

has domain
Workflowc

has description citation sourcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDescriptionCitationSource

When a description of a resource is a citation, this attribute can be used to mark it as citation and give the source for the citation. The language tag denotes the language of the citation this source is for.

has example datadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExampleData

example data for the given concept

has label sourcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLabelSource

The source for the resource label (rdfs:label or skos:preflabel). The language tag denotes the language of the label this source is for.

has symboldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSymbol

The typical formula symbol used

has symbol latexdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSymbolLatex

The typical formula symbol used in latex notation

has typical unit labeldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTypicalUnitLabel

A typical unit label for the resource

hasAbsoluteCrossheadTraveldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAbsoluteCrossheadTravel

has sub-properties
hasAbsoluteCrossheadTravel_mmdp

hasAbsoluteCrossheadTravel_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAbsoluteCrossheadTravel_mm

has super-properties
hasAbsoluteCrossheadTraveldp

hasAmplitudeFiledp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAmplitudeFile

hasAnisotropicYieldFunctiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunction

hasAnisotropicYieldFunctionParametersdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasAnisotropicYieldFunctionParameters

hasBatchNumberdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBatchNumber

hasBiaxialStressdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBiaxialStress

has sub-properties
hasBiaxialStress_MPadp

hasBiaxialStress_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBiaxialStress_MPa

has super-properties
hasBiaxialStressdp

hasBlankHolderForcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBlankHolderForce

has sub-properties
hasBlankHolderForce_kNdp

hasBlankHolderForce_kNdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBlankHolderForce_kN

has super-properties
hasBlankHolderForcedp

hasBoundaryFiledp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasBoundaryFile

hasCalibrationComponentsdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCalibrationComponents

hasCalibrationStatusdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCalibrationStatus

hasCameraSystemdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCameraSystem

hasCharacteristicEngineeringStrainRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCharacteristicEngineeringStrainRate

has sub-properties
hasCharacteristicEngineeringStrainRate_s-1dp

hasCharacteristicEngineeringStrainRate_s-1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCharacteristicEngineeringStrainRate_s-1

has super-properties
hasCharacteristicEngineeringStrainRatedp

hasClampingdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasClamping

hasClampingForcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasClampingForce

has sub-properties
hasClampingForce_Ndp

hasClampingForce_Ndp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasClampingForce_N

has super-properties
hasClampingForcedp

hasCoefficientOfCorrelationdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCoefficientOfCorrelation

has sub-properties
hasCoefficientOfCorrelation_-dp

hasCoefficientOfCorrelation_-dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCoefficientOfCorrelation_-

has super-properties
hasCoefficientOfCorrelationdp

hasComplexPhaseSteeldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasComplexPhaseSteel

hasCompositiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasComposition

hasComputerControlledTensileTestingMachinedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasComputerControlledTensileTestingMachine

hasCrossheadDisplacementdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrossheadDisplacement

has sub-properties
hasCrossheadDisplacement_mmdp

hasCrossheadDisplacement_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrossheadDisplacement_mm

has super-properties
hasCrossheadDisplacementdp

hasCrossheadSeparationRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrossheadSeparationRate

has sub-properties
hasCrossheadSeparationRate_mm s -1dp, hasCrossheadSeparationRate_mm/sdp

hasCrossheadSeparationRate_mm s -1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrossheadSeparationRate_mm%20s%20-1

has super-properties
hasCrossheadSeparationRatedp

hasCrossheadSeparationRate_mm/sdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrossheadSeparationRate_mm%2Fs

has super-properties
hasCrossheadSeparationRatedp

hasCrystalPlasticityConstitutiveModeldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityConstitutiveModel

hasCrystalPlasticityParameterFiledp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasCrystalPlasticityParameterFile

hasDataSamplingFrequencydp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDataSamplingFrequency

hasDefaultValuedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDefaultValue

hasDeliveryDatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDeliveryDate

hasDiameterdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameter

has sub-properties
hasDiameter_mmdp

hasDiameter_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameter_mm

has super-properties
hasDiameterdp

hasDiameterAfterFracture1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture1

has sub-properties
hasDiameterAfterFracture1_mmdp

hasDiameterAfterFracture1_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture1_mm

has super-properties
hasDiameterAfterFracture1dp

hasDiameterAfterFracture2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture2

has sub-properties
hasDiameterAfterFracture2_mmdp

hasDiameterAfterFracture2_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiameterAfterFracture2_mm

has super-properties
hasDiameterAfterFracture2dp

hasDieTooldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDieTool

hasDiscretizationdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDiscretization

hasDisplacementdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDisplacement

has sub-properties
hasDisplacement_mmdp

hasDisplacement_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDisplacement_mm

has super-properties
hasDisplacementdp

hasDisplacementTransducerdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDisplacementTransducer

hasDrawingSpeeddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDrawingSpeed

has sub-properties
hasDrawingSpeed_mm/mindp

hasDrawingSpeed_mm/mindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDrawingSpeed_mm%2Fmin

has super-properties
hasDrawingSpeeddp

hasDualPhaseSteeldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDualPhaseSteel

hasDX56Ddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDX56D

hasDynamometerAreadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDynamometerArea

has sub-properties
hasDynamometerArea_mm2dp

hasDynamometerArea_mm2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasDynamometerArea_mm2

has super-properties
hasDynamometerAreadp

hasEbsdFileNamedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEbsdFileName

hasEffecticStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEffecticStrain

has sub-properties
hasEffecticStrain_-dp

hasEffecticStrain_-dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEffecticStrain_-

has super-properties
hasEffecticStraindp

hasEffectiveStressdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEffectiveStress

has sub-properties
hasEffectiveStress_MPadp

hasEffectiveStress_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEffectiveStress_MPa

has super-properties
hasEffectiveStressdp

hasElasticConstantC11dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC11

has sub-properties
hasElasticConstantC11_MPadp

hasElasticConstantC11_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC11_MPa

has super-properties
hasElasticConstantC11dp

hasElasticConstantC12dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC12

has sub-properties
hasElasticConstantC12_MPadp

hasElasticConstantC12_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC12_MPa

has super-properties
hasElasticConstantC12dp

hasElasticConstantC44dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC44

has sub-properties
hasElasticConstantC44_MPadp

hasElasticConstantC44_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElasticConstantC44_MPa

has super-properties
hasElasticConstantC44dp

hasElongationdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElongation

has sub-properties
hasElongation_mmdp

hasElongation_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasElongation_mm

has super-properties
hasElongationdp

hasEngineeringStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEngineeringStrain

has sub-properties
hasEngineeringStrain_%dp

hasEngineeringStrain_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEngineeringStrain_%25

has super-properties
hasEngineeringStraindp

hasEngineeringStressdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEngineeringStress

has sub-properties
hasEngineeringStress_MPadp

hasEngineeringStress_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEngineeringStress_MPa

has super-properties
hasEngineeringStressdp

hasEstimatedStrainRateOverTheParallelLengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEstimatedStrainRateOverTheParallelLength

has sub-properties
hasEstimatedStrainRateOverTheParallelLength_s-1dp

hasEstimatedStrainRateOverTheParallelLength_s-1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEstimatedStrainRateOverTheParallelLength_s-1

has super-properties
hasEstimatedStrainRateOverTheParallelLengthdp

hasEulerAngle1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEulerAngle1

hasEulerAngle2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEulerAngle2

hasEulerAngle3dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEulerAngle3

hasEulerAngleConventiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEulerAngleConvention

hasEvaluationMethoddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasEvaluationMethod

hasExperimentIdentifierdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExperimentIdentifier

hasExtensiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtension

has sub-properties
hasExtension_mmdp

hasExtension_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtension_mm

has super-properties
hasExtensiondp

hasExtensionAtFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensionAtFracture

has sub-properties
hasExtensionAtFracture_mmdp

hasExtensionAtFracture_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensionAtFracture_mm

has super-properties
hasExtensionAtFracturedp

hasExtensionMeasuringSystemdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensionMeasuringSystem

hasExtensometerGaugeLengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensometerGaugeLength

has sub-properties
hasExtensometerGaugeLength_mmdp

hasExtensometerGaugeLength_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasExtensometerGaugeLength_mm

has super-properties
hasExtensometerGaugeLengthdp

hasFEMSolverdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFEMSolver

hasFinalGaugeLengthAfterFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFinalGaugeLengthAfterFracture

has sub-properties
hasFinalGaugeLengthAfterFracture_mmdp

hasFinalGaugeLengthAfterFracture_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFinalGaugeLengthAfterFracture_mm

has super-properties
hasFinalGaugeLengthAfterFracturedp

hasFLCDeterminationdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFLCDetermination

hasForcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForce

has sub-properties
hasForce_Ndp, hasForce_kNdp

hasForce_kNdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForce_kN

has super-properties
hasForcedp

hasForce_Ndp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForce_N

has super-properties
hasForcedp

hasForceAtFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForceAtFracture

hasForceMeasuringDevicedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForceMeasuringDevice

hasForceMeasuringSystemdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasForceMeasuringSystem

hasFormingLimitCurvedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFormingLimitCurve

hasFormingLimitDiagramdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFormingLimitDiagram

hasFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFracture

hasFrameRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFrameRate

has sub-properties
hasFrameRate_s-1dp

hasFrameRate_s-1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasFrameRate_s-1

has super-properties
hasFrameRatedp

hasGaugeLengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGaugeLength

has sub-properties
hasGaugeLength_mmdp

hasGaugeLength_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGaugeLength_mm

has super-properties
hasGaugeLengthdp

hasGradedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGrade

hasGrainNumberdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGrainNumber

hasGriddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGrid

hasGridSizedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGridSize

has sub-properties
hasGridSize_mmdp

hasGridSize_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasGridSize_mm

has super-properties
hasGridSizedp

hasHardeningCurvedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningCurve

hasHardeningLawdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningLaw

hasHardeningParameterTau0dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau0

has sub-properties
hasHardeningParameterTau0_MPadp

hasHardeningParameterTau0_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau0_MPa

has super-properties
hasHardeningParameterTau0dp

hasHardeningParameterTau1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau1

has sub-properties
hasHardeningParameterTau1_MPadp

hasHardeningParameterTau1_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTau1_MPa

has super-properties
hasHardeningParameterTau1dp

hasHardeningParameterTheta0dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta0

has sub-properties
hasHardeningParameterTheta0_MPadp

hasHardeningParameterTheta0_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta0_MPa

has super-properties
hasHardeningParameterTheta0dp

hasHardeningParameterTheta1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta1

has sub-properties
hasHardeningParameterTheta1_MPadp

hasHardeningParameterTheta1_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHardeningParameterTheta1_MPa

has super-properties
hasHardeningParameterTheta1dp

hasHCT980Cdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHCT980C

hasHCT980Xdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHCT980X

hasHX340LADdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasHX340LAD

hasInitialDisplacementRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialDisplacementRate

has sub-properties
hasInitialDisplacementRate_mm s -1dp, hasInitialDisplacementRate_mm/s or m/sdp

hasInitialDisplacementRate_mm s -1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialDisplacementRate_mm%20s%20-1

has super-properties
hasInitialDisplacementRatedp

hasInitialDisplacementRate_mm/s or m/sdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialDisplacementRate_mm%2Fs%20or%20m%2Fs

has super-properties
hasInitialDisplacementRatedp

hasInitialSheetThicknessdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialSheetThickness

has sub-properties
hasInitialSheetThickness_mmdp

hasInitialSheetThickness_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialSheetThickness_mm

has super-properties
hasInitialSheetThicknessdp

hasInitialThicknessdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialThickness

has sub-properties
hasInitialThickness_mmdp

hasInitialThickness_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInitialThickness_mm

has super-properties
hasInitialThicknessdp

hasInnerDiameterBlankHolderdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInnerDiameterBlankHolder

has sub-properties
hasInnerDiameterBlankHolder_mmdp

hasInnerDiameterBlankHolder_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInnerDiameterBlankHolder_mm

has super-properties
hasInnerDiameterBlankHolderdp

hasInnerDiameterDiedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInnerDiameterDie

has sub-properties
hasInnerDiameterDie_mmdp

hasInnerDiameterDie_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInnerDiameterDie_mm

has super-properties
hasInnerDiameterDiedp

hasInteractionMatrixdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInteractionMatrix

has sub-properties
hasInteractionMatrix_-dp

hasInteractionMatrix_-dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInteractionMatrix_-

has super-properties
hasInteractionMatrixdp

hasInventoryNumberdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasInventoryNumber

hasLaboratorydp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLaboratory

hasLatentHardeningQ0dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ0

has sub-properties
hasLatentHardeningQ0_-dp

hasLatentHardeningQ0_-dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ0_-

has super-properties
hasLatentHardeningQ0dp

hasLatentHardeningQ1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ1

has sub-properties
hasLatentHardeningQ1_-dp

hasLatentHardeningQ1_-dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLatentHardeningQ1_-

has super-properties
hasLatentHardeningQ1dp

hasLatticeStructuredp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLatticeStructure

hasLocationdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLocation

hasLowerYieldStrengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLowerYieldStrength

has sub-properties
hasLowerYieldStrength_MPadp

hasLowerYieldStrength_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLowerYieldStrength_MPa

has super-properties
hasLowerYieldStrengthdp

hasLubricationSystemdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLubricationSystem

hasMachinedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMachine

has sub-properties
hasMachine_einheitslosdp

hasMachine_einheitslosdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMachine_einheitslos

has super-properties
hasMachinedp

hasMajorTrueStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMajorTrueStrain

hasMaterialdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaterial

hasMaterialCarddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaterialCard

hasMaterialClassdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaterialClass

hasMaximumForcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForce

has sub-properties
hasMaximumForce_Ndp, hasMaximumForce_kNdp

hasMaximumForce_kNdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForce_kN

has super-properties
hasMaximumForcedp

hasMaximumForce_Ndp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForce_N

has super-properties
hasMaximumForcedp

hasMaximumForceDiscontinousYieldingdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForceDiscontinousYielding

has sub-properties
hasMaximumForceDiscontinousYielding_Ndp

hasMaximumForceDiscontinousYielding_Ndp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForceDiscontinousYielding_N

has super-properties
hasMaximumForceDiscontinousYieldingdp

hasMaximumForceNoDiscontinousYieldingdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForceNoDiscontinousYielding

has sub-properties
hasMaximumForceNoDiscontinousYielding_Ndp

hasMaximumForceNoDiscontinousYielding_Ndp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumForceNoDiscontinousYielding_N

has super-properties
hasMaximumForceNoDiscontinousYieldingdp

hasMaximumSpeeddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMaximumSpeed

hasMeanEngineeringStrainRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeanEngineeringStrainRate

has sub-properties
hasMeanEngineeringStrainRate_s-1dp

hasMeanEngineeringStrainRate_s-1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeanEngineeringStrainRate_s-1

has super-properties
hasMeanEngineeringStrainRatedp

hasMeanPlasticStrainRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeanPlasticStrainRate

has sub-properties
hasMeanPlasticStrainRate_s-1dp

hasMeanPlasticStrainRate_s-1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeanPlasticStrainRate_s-1

has super-properties
hasMeanPlasticStrainRatedp

hasMeasuringAiddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeasuringAid

hasMeasuringDevicedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeasuringDevice

hasMeasuringRangedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMeasuringRange

hasMicroalloyedSteeldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMicroalloyedSteel

hasMicrostructureModeldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMicrostructureModel

hasMildSteeldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMildSteel

hasMinimumCrossSectionAfterFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinimumCrossSectionAfterFracture

has sub-properties
hasMinimumCrossSectionAfterFracture_mm2dp

hasMinimumCrosssectionAfterFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinimumCrosssectionAfterFracture

has sub-properties
hasMinimumCrosssectionAfterFracture_mm2dp

hasMinimumCrossSectionAfterFracture_mm2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinimumCrossSectionAfterFracture_mm2

has super-properties
hasMinimumCrossSectionAfterFracturedp

hasMinimumCrosssectionAfterFracture_mm2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinimumCrosssectionAfterFracture_mm2

has super-properties
hasMinimumCrosssectionAfterFracturedp

hasMinorTrueStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasMinorTrueStrain

hasModulusOfElasticitydp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasModulusOfElasticity

has sub-properties
hasModulusOfElasticity_GPadp, hasModulusOfElasticity_MPadp

hasModulusOfElasticity_GPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasModulusOfElasticity_GPa

has super-properties
hasModulusOfElasticitydp

hasModulusOfElasticity_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasModulusOfElasticity_MPa

has super-properties
hasModulusOfElasticitydp

hasNominalEngineeringStrainRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNominalEngineeringStrainRate

has sub-properties
hasNominalEngineeringStrainRate_s-1dp

hasNominalEngineeringStrainRate_s-1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNominalEngineeringStrainRate_s-1

has super-properties
hasNominalEngineeringStrainRatedp

hasNotchTensileStrengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNotchTensileStrength

has sub-properties
hasNotchTensileStrength_MPadp

hasNotchTensileStrength_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNotchTensileStrength_MPa

has super-properties
hasNotchTensileStrengthdp

hasNumberGrainsdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNumberGrains

hasNumberOfVirtualExperimentsdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasNumberOfVirtualExperiments

hasOperatordp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOperator

hasOriginalCrossSectiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalCrossSection

has sub-properties
hasOriginalCrossSection_mm2dp

hasOriginalCrosssectiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalCrosssection

has sub-properties
hasOriginalCrosssection_mm2dp

hasOriginalCrossSection_mm2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalCrossSection_mm2

has super-properties
hasOriginalCrossSectiondp

hasOriginalCrosssection_mm2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalCrosssection_mm2

has super-properties
hasOriginalCrosssectiondp

hasOriginalDiameterdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalDiameter

has sub-properties
hasOriginalDiameter_mmdp

hasOriginalDiameter_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalDiameter_mm

has super-properties
hasOriginalDiameterdp

hasOriginalGaugeLengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalGaugeLength

has sub-properties
hasOriginalGaugeLength_mmdp

hasOriginalGaugeLength_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalGaugeLength_mm

has super-properties
hasOriginalGaugeLengthdp

hasOriginalThicknessdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalThickness

has sub-properties
hasOriginalThickness_mmdp

hasOriginalThickness_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalThickness_mm

has super-properties
hasOriginalThicknessdp

hasOriginalWidthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalWidth

has sub-properties
hasOriginalWidth_mmdp

hasOriginalWidth_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasOriginalWidth_mm

has super-properties
hasOriginalWidthdp

hasParallelLengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasParallelLength

has sub-properties
hasParallelLength_mmdp

hasParallelLength_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasParallelLength_mm

has super-properties
hasParallelLengthdp

hasPercentageElongationdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageElongation

has sub-properties
hasPercentageElongation_%dp, hasPercentageElongation_mmdp

hasPercentageElongation_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageElongation_%25

has super-properties
hasPercentageElongationdp

hasPercentageElongation_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageElongation_mm

has super-properties
hasPercentageElongationdp

hasPercentageElongationAfterFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageElongationAfterFracture

has sub-properties
hasPercentageElongationAfterFracture_%dp

hasPercentageElongationAfterFracture_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageElongationAfterFracture_%25

has super-properties
hasPercentageElongationAfterFracturedp

hasPercentageExtensiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageExtension

has sub-properties
hasPercentageExtension_- dp, hasPercentageExtension_1dp

hasPercentageExtension_- dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageExtension_-%20

has super-properties
hasPercentageExtensiondp

hasPercentageExtension_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageExtension_1

has super-properties
hasPercentageExtensiondp

hasPercentagePermanentElongationdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePermanentElongation

has sub-properties
hasPercentagePermanentElongation_%dp

hasPercentagePermanentElongation_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePermanentElongation_%25

has super-properties
hasPercentagePermanentElongationdp

hasPercentagePermanentExtensiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtension

has sub-properties
hasPercentagePermanentExtension_%dp, hasPercentagePermanentExtension_1dp

hasPercentagePermanentExtension_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtension_%25

has super-properties
hasPercentagePermanentExtensiondp

hasPercentagePermanentExtension_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePermanentExtension_1

has super-properties
hasPercentagePermanentExtensiondp

hasPercentagePlasticExtensionAtMaximumForcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePlasticExtensionAtMaximumForce

has sub-properties
hasPercentagePlasticExtensionAtMaximumForce_%dp

hasPercentagePlasticExtensionAtMaximumForce_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentagePlasticExtensionAtMaximumForce_%25

has super-properties
hasPercentagePlasticExtensionAtMaximumForcedp

hasPercentageReductionOfAreadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageReductionOfArea

has sub-properties
hasPercentageReductionOfArea_%dp

hasPercentageReductionOfArea_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageReductionOfArea_%25

has super-properties
hasPercentageReductionOfAreadp

hasPercentageTotalExtensionAtFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtFracture

has sub-properties
hasPercentageTotalExtensionAtFracture_%dp

hasPercentageTotalExtensionAtFracture_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtFracture_%25

has super-properties
hasPercentageTotalExtensionAtFracturedp

hasPercentageTotalExtensionAtMaximumForcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtMaximumForce

has sub-properties
hasPercentageTotalExtensionAtMaximumForce_%dp

hasPercentageTotalExtensionAtMaximumForce_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageTotalExtensionAtMaximumForce_%25

has super-properties
hasPercentageTotalExtensionAtMaximumForcedp

hasPercentageYieldPointExtensiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageYieldPointExtension

has sub-properties
hasPercentageYieldPointExtension_%dp

hasPercentageYieldPointExtension_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPercentageYieldPointExtension_%25

has super-properties
hasPercentageYieldPointExtensiondp

hasPermanentSetStrengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPermanentSetStrength

has sub-properties
hasPermanentSetStrength_MPadp

hasPermanentSetStrength_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPermanentSetStrength_MPa

has super-properties
hasPermanentSetStrengthdp

hasPistonSpeeddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPistonSpeed

has sub-properties
hasPistonSpeed_mm/sdp

hasPistonSpeed_mm/sdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPistonSpeed_mm%2Fs

has super-properties
hasPistonSpeeddp

hasPlasticEngineeringStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPlasticEngineeringStrain

has sub-properties
hasPlasticEngineeringStrain_%dp

hasPlasticEngineeringStrain_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPlasticEngineeringStrain_%25

has super-properties
hasPlasticEngineeringStraindp

hasPoissonsRatiodp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPoissonsRatio

has sub-properties
hasPoissonsRatio_1dp

hasPoissonsRatio_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPoissonsRatio_1

has super-properties
hasPoissonsRatiodp

hasPostProcessingSoftwaredp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPostProcessingSoftware

hasPreliminaryForcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPreliminaryForce

has sub-properties
hasPreliminaryForce_MPadp, hasPreliminaryForce_kNdp

hasPreliminaryForce_kNdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPreliminaryForce_kN

has super-properties
hasPreliminaryForcedp

hasPreliminaryForce_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPreliminaryForce_MPa

has super-properties
hasPreliminaryForcedp

hasPressureChamberdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPressureChamber

has sub-properties
hasPressureChamber_MPadp, hasPressureChamber_N/mm2dp

hasPressureChamber_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPressureChamber_MPa

has super-properties
hasPressureChamberdp

hasPressureChamber_N/mm2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPressureChamber_N%2Fmm2

has super-properties
hasPressureChamberdp

hasProofStrength_0.2Percentagedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrength_0.2Percentage

has sub-properties
hasProofStrength_0.2Percentage_MPadp

hasProofStrength_0.2Percentage_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrength_0.2Percentage_MPa

has super-properties
hasProofStrength_0.2Percentagedp

hasProofStrength_1Percentagedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrength_1Percentage

has sub-properties
hasProofStrength_1Percentage_MPadp

hasProofStrength_1Percentage_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrength_1Percentage_MPa

has super-properties
hasProofStrength_1Percentagedp

hasProofStrengthPlasticExtensiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrengthPlasticExtension

has sub-properties
hasProofStrengthPlasticExtension_MPadp

hasProofStrengthPlasticExtension_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrengthPlasticExtension_MPa

has super-properties
hasProofStrengthPlasticExtensiondp

hasProofStrengthTotalExtensiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrengthTotalExtension

has sub-properties
hasProofStrengthTotalExtension_MPadp

hasProofStrengthTotalExtension_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasProofStrengthTotalExtension_MPa

has super-properties
hasProofStrengthTotalExtensiondp

hasPunchDiameterdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchDiameter

has sub-properties
hasPunchDiameter_mmdp

hasPunchDiameter_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchDiameter_mm

has super-properties
hasPunchDiameterdp

hasPunchDisplacementdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchDisplacement

has sub-properties
hasPunchDisplacement_mmdp

hasPunchDisplacement_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchDisplacement_mm

has super-properties
hasPunchDisplacementdp

hasPunchVelocitydp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchVelocity

has sub-properties
hasPunchVelocity_mm/sdp

hasPunchVelocity_mm/sdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasPunchVelocity_mm%2Fs

has super-properties
hasPunchVelocitydp

hasRadiusdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadius

has sub-properties
hasRadius_mmdp

hasRadius_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadius_mm

has super-properties
hasRadiusdp

hasRadiusCurvaturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadiusCurvature

has sub-properties
hasRadiusCurvature_mmdp

hasRadiusCurvature_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadiusCurvature_mm

has super-properties
hasRadiusCurvaturedp

hasRadiusDiedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadiusDie

has sub-properties
hasRadiusDie_mmdp

hasRadiusDie_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRadiusDie_mm

has super-properties
hasRadiusDiedp

hasRateSensitivityOfSlipdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRateSensitivityOfSlip

has sub-properties
hasRateSensitivityOfSlip_-dp

hasRateSensitivityOfSlip_-dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRateSensitivityOfSlip_-

has super-properties
hasRateSensitivityOfSlipdp

hasReferenceShearRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasReferenceShearRate

has sub-properties
hasReferenceShearRate_-dp

hasReferenceShearRate_-dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasReferenceShearRate_-

has super-properties
hasReferenceShearRatedp

hasRelativeStandardDeviationOfTheSlopedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRelativeStandardDeviationOfTheSlope

has sub-properties
hasRelativeStandardDeviationOfTheSlope_%dp

hasRelativeStandardDeviationOfTheSlope_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRelativeStandardDeviationOfTheSlope_%25

has super-properties
hasRelativeStandardDeviationOfTheSlopedp

hasRemarkdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRemark

hasResultsFiledp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasResultsFile

hasRollingDirectiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRollingDirection

hasRValuedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRValue

has sub-properties
hasRValue_1dp

hasRValue_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasRValue_1

has super-properties
hasRValuedp

hasSampleCodedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSampleCode

hasSampleIdentifierdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSampleIdentifier

hasSampleIdentifier-2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSampleIdentifier-2

hasSerialNumberdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSerialNumber

hasShearLengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLength

has sub-properties
hasShearLength_mmdp

hasShearLength_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLength_mm

has super-properties
hasShearLengthdp

hasShearLengthAfterFracture1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture1

has sub-properties
hasShearLengthAfterFracture1_mmdp

hasShearLengthAfterFracture1_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture1_mm

has super-properties
hasShearLengthAfterFracture1dp

hasShearLengthAfterFracture2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture2

has sub-properties
hasShearLengthAfterFracture2_mmdp

hasShearLengthAfterFracture2_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearLengthAfterFracture2_mm

has super-properties
hasShearLengthAfterFracture2dp

hasShearStrengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearStrength

has sub-properties
hasShearStrength_MPadp

hasShearStrength_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasShearStrength_MPa

has super-properties
hasShearStrengthdp

hasSheetThicknessdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSheetThickness

hasSlipSystemNumberdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSlipSystemNumber

hasSlopeElasticPartStressStrainCurvedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSlopeElasticPartStressStrainCurve

has sub-properties
hasSlopeElasticPartStressStrainCurve_MPadp

hasSlopeElasticPartStressStrainCurve_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSlopeElasticPartStressStrainCurve_MPa

has super-properties
hasSlopeElasticPartStressStrainCurvedp

hasSoftwaredp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSoftware

hasSpecificPlasticWorkdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWork

hasSpecificPlasticWorkValuedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSpecificPlasticWorkValue

hasSpecimenWidthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSpecimenWidth

has sub-properties
hasSpecimenWidth_mmdp

hasSpecimenWidth_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSpecimenWidth_mm

has super-properties
hasSpecimenWidthdp

hasStandardDeviationOfTheSlopedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStandardDeviationOfTheSlope

has sub-properties
hasStandardDeviationOfTheSlope_MPadp

hasStandardDeviationOfTheSlope_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStandardDeviationOfTheSlope_MPa

has super-properties
hasStandardDeviationOfTheSlopedp

hasSteeldp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSteel

hasStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrain

has sub-properties
hasStrain_%dp

hasStrain_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrain_%25

has super-properties
hasStraindp

hasStrainRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainRate

has sub-properties
hasStrainRate_1/sdp, hasStrainRate_s-1dp

hasStrainRate_1/sdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainRate_1%2Fs

has super-properties
hasStrainRatedp

hasStrainRate_s-1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStrainRate_s-1

has super-properties
hasStrainRatedp

hasStressdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStress

has sub-properties
hasStress_MPadp

hasStress_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStress_MPa

has super-properties
hasStressdp

hasStressRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStressRate

has sub-properties
hasStressRate_MPa s -1dp, hasStressRate_MPa/sdp

hasStressRate_MPa s -1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStressRate_MPa%20s%20-1

has super-properties
hasStressRatedp

hasStressRate_MPa/sdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasStressRate_MPa%2Fs

has super-properties
hasStressRatedp

hasSupplierdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasSupplier

hasTargetClampingForcedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTargetClampingForce

has sub-properties
hasTargetClampingForce_kNdp

hasTargetClampingForce_kNdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTargetClampingForce_kN

has super-properties
hasTargetClampingForcedp

hasTensileStrengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTensileStrength

has sub-properties
hasTensileStrength_MPadp

hasTensileStrength_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTensileStrength_MPa

has super-properties
hasTensileStrengthdp

hasTensileTestingMachinedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTensileTestingMachine

hasTestDirectiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestDirection

hasTesterdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTester

hasTestingDirectiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestingDirection

hasTestingRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestingRate

hasTestPiecedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestPiece

hasTestPieceGeometrydp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestPieceGeometry

hasTestPieceLengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestPieceLength

has sub-properties
hasTestPieceLength_mmdp

hasTestPieceLength_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestPieceLength_mm

has super-properties
hasTestPieceLengthdp

hasTestStandarddp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestStandard

hasTestTemperaturdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestTemperatur

hasTestTemperaturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestTemperature

has sub-properties
hasTestTemperature_°Cdp

hasTestTemperature_°Cdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestTemperature_%C2%B0C

has super-properties
hasTestTemperaturedp

hasTestTimedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestTime

has sub-properties
hasTestTime_sdp

hasTestTime_sdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTestTime_s

has super-properties
hasTestTimedp

hasTexturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTexture

hasThicknessAfterFracture1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture1

has sub-properties
hasThicknessAfterFracture1_mmdp

hasThicknessAfterFracture1_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture1_mm

has super-properties
hasThicknessAfterFracture1dp

hasThicknessAfterFracture2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture2

has sub-properties
hasThicknessAfterFracture2_mmdp

hasThicknessAfterFracture2_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasThicknessAfterFracture2_mm

has super-properties
hasThicknessAfterFracture2dp

hasTimedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTime

has sub-properties
hasTime_sdp

hasTime_sdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTime_s

has super-properties
hasTimedp

hasTimeDependentEngineeringStrainRatedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTimeDependentEngineeringStrainRate

has sub-properties
hasTimeDependentEngineeringStrainRate_s-1dp

hasTimeDependentEngineeringStrainRate_s-1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTimeDependentEngineeringStrainRate_s-1

has super-properties
hasTimeDependentEngineeringStrainRatedp

hasTimeStampdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTimeStamp

hasTotalEngineeringStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTotalEngineeringStrain

has sub-properties
hasTotalEngineeringStrain_%dp

hasTotalEngineeringStrain_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTotalEngineeringStrain_%25

has super-properties
hasTotalEngineeringStraindp

hasTotalLengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTotalLength

has sub-properties
hasTotalLength_mmdp

hasTotalLength_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTotalLength_mm

has super-properties
hasTotalLengthdp

hasTransitionRadiusdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTransitionRadius

has sub-properties
hasTransitionRadius_mmdp

hasTransitionRadius_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTransitionRadius_mm

has super-properties
hasTransitionRadiusdp

hasTrueFractureStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueFractureStrain

hasTrueFractureStressdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueFractureStress

has sub-properties
hasTrueFractureStress_MPadp

hasTrueFractureStress_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueFractureStress_MPa

has super-properties
hasTrueFractureStressdp

hasTruePlasticStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTruePlasticStrain

has sub-properties
hasTruePlasticStrain_1dp

hasTruePlasticStrain_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTruePlasticStrain_1

has super-properties
hasTruePlasticStraindp

hasTruePlasticStrainAtFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTruePlasticStrainAtFracture

has sub-properties
hasTruePlasticStrainAtFracture_%dp

hasTruePlasticStrainAtFracture_%dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTruePlasticStrainAtFracture_%25

has super-properties
hasTruePlasticStrainAtFracturedp

hasTruePlasticThicknessStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTruePlasticThicknessStrain

hasTrueStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStrain

has sub-properties
hasTrueStrain_1dp

hasTrueStrain_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStrain_1

has super-properties
hasTrueStraindp

hasTrueStressdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStress

has sub-properties
hasTrueStress_MPadp

hasTrueStress_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStress_MPa

has super-properties
hasTrueStressdp

hasTrueStressAtFracturedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStressAtFracture

has sub-properties
hasTrueStressAtFracture_MPadp

hasTrueStressAtFracture_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueStressAtFracture_MPa

has super-properties
hasTrueStressAtFracturedp

hasTrueThicknessStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueThicknessStrain

hasTrueTotalStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueTotalStrain

has sub-properties
hasTrueTotalStrain_1dp

hasTrueTotalStrain_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueTotalStrain_1

has super-properties
hasTrueTotalStraindp

hasTrueWidthStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueWidthStrain

has sub-properties
hasTrueWidthStrain_1dp

hasTrueWidthStrain_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasTrueWidthStrain_1

has super-properties
hasTrueWidthStraindp

hasUpperYieldStrengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasUpperYieldStrength

has sub-properties
hasUpperYieldStrength_MPadp

hasUpperYieldStrength_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasUpperYieldStrength_MPa

has super-properties
hasUpperYieldStrengthdp

hasUserdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasUser

hasWidthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidth

has sub-properties
hasWidth_mmdp

hasWidth_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidth_mm

has super-properties
hasWidthdp

hasWidthAfterFracture1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture1

has sub-properties
hasWidthAfterFracture1_mmdp

hasWidthAfterFracture1_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture1_mm

has super-properties
hasWidthAfterFracture1dp

hasWidthAfterFracture2dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture2

has sub-properties
hasWidthAfterFracture2_mmdp

hasWidthAfterFracture2_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthAfterFracture2_mm

has super-properties
hasWidthAfterFracture2dp

hasWidthChangedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthChange

has sub-properties
hasWidthChange_mmdp

hasWidthChange_mmdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthChange_mm

has super-properties
hasWidthChangedp

hasWidthStraindp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthStrain

has sub-properties
hasWidthStrain_1dp

hasWidthStrain_1dp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWidthStrain_1

has super-properties
hasWidthStraindp

hasWorkdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWork

has sub-properties
hasWork_kJdp

hasWork_kJdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasWork_kJ

has super-properties
hasWorkdp

hasYieldForce_0.2Percentagedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldForce_0.2Percentage

has sub-properties
hasYieldForce_0.2Percentage_kNdp

hasYieldForce_0.2Percentage_kNdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldForce_0.2Percentage_kN

has super-properties
hasYieldForce_0.2Percentagedp

hasYieldStrengthdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldStrength

has sub-properties
hasYieldStrength_MPadp

hasYieldStrength_MPadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasYieldStrength_MPa

has super-properties
hasYieldStrengthdp

inputdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/input

has domain
Workflowc

metadatadp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/metadata

has domain
Workflowc

normdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/norm

The norm according to which the experiment was conducted.

outputdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/output

has domain
Workflowc

parametersdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/parameters

has domain
Workflowc

sequencedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/sequence

has domain
Workflowc
The sequence of steps

start timedp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/jobStartTime

has domain
Jobc
has range
date time
time and date when the execution of a job instance was started

stepsdp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/workflowSteps

has domain
Workflowc
operations on data, can be other workflows, has pervious and following step

uridp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/ressourceUri

has domain
Filec
has range
string

versiondp back to ToC or Data Property ToC

IRI: https://w3id.org/steel/ProcessOntology/codeVersion

has domain
Codec
has range
string
exact version of a code

Named Individuals

AbsoluteCrossheadTravelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/AbsoluteCrossheadTravel

belongs to
conceptc
has facts
has example datadp "1158.37"
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "deepl translator"@en
has typical unit labeldp "mm"
is also defined as
class

AmplitudeFileni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/AmplitudeFile

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

AnisotropicYieldFunctionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/AnisotropicYieldFunction

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

AnisotropicYieldFunctionParametersni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/AnisotropicYieldFunctionParameters

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

BatchNumberni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/BatchNumber

belongs to
conceptc
has facts
has label sourcedp "K-Item"@de
is also defined as
class

BiaxialStressni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/BiaxialStress

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@en
has symboldp "σ_B"@en
has symbol latexdp "sigma_B"@en
has typical unit labeldp "MPa"
is also defined as
class

BlankHolderForceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/BlankHolderForce

belongs to
conceptc
has facts
has example datadp "325"
has example datadp "600"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 13"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 5"@en
has typical unit labeldp "kN"
is also defined as
class

BoundaryFileni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/BoundaryFile

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

CalibrationComponentsni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CalibrationComponents

belongs to
conceptc
has facts
has example datadp "Maschinenweg, Lastzelle"
has label sourcedp "K-Item"@de
is also defined as
class

CalibrationStatusni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CalibrationStatus

belongs to
conceptc
has facts
has example datadp "Validierung vor Gebrauch"
has label sourcedp "K-Item"@de
has label sourcedp "Messmitteldatenbank"@de
is also defined as
class

CameraSystemni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CameraSystem

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
is also defined as
class

CharacteristicEngineeringStrainRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CharacteristicEngineeringStrainRate

belongs to
conceptc
has facts
has example datadp "0.8"
has label sourcedp "YS1-Fz-D1Q"@de
has typical unit labeldp "s-1"
is also defined as
class

Clampingni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Clamping

belongs to
conceptc
has facts
has example datadp "with bead"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
is also defined as
class

ClampingForceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ClampingForce

belongs to
conceptc
has facts
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "deepl translator"@en
has typical unit labeldp "N"
is also defined as
class

CoefficientOfCorrelationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CoefficientOfCorrelation

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.15"@de
has label sourcedp "DIN EN ISO 6892-1, 3.15"@en
has symboldp "R2"@en
has symbol latexdp "R^2"@en
has typical unit labeldp "-"
is also defined as
class

ComplexPhaseSteelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ComplexPhaseSteel

belongs to
conceptc
has facts
has example datadp "HCT980C"
has label sourcedp "DIN EN 10346_2015"@de
is also defined as
class

Compositionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Composition

belongs to
conceptc
has facts
has label sourcedp "K-Item"@de
is also defined as
class

ComputerControlledTensileTestingMachineni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ComputerControlledTensileTestingMachine

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.12"@de
has label sourcedp "DIN EN ISO 6892-1, 3.12"@en
is also defined as
class

CrossheadDisplacementni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CrossheadDisplacement

belongs to
conceptc
has facts
has example datadp "14786"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "mm"
is also defined as
class

CrossheadSeparationRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CrossheadSeparationRate

belongs to
conceptc
has facts
has example datadp "0.01"
has example datadp "0.02"
has example datadp "0.1"
has example datadp "4800"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "DIN EN ISO 6892-1, 3.7.3"@de
has label sourcedp "DIN EN ISO 6892-1, 3.7.3"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "vc"@en
has symbol latexdp "nu_c"@en
has typical unit labeldp "mm s -1"
has typical unit labeldp "mm/s"
is also defined as
class

CrystalPlasticityConstitutiveModelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CrystalPlasticityConstitutiveModel

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

CrystalPlasticityParameterFileni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/CrystalPlasticityParameterFile

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

DamageExponentni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DamageExponent

belongs to
conceptc
has facts
has example datadp "1.5"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

DamageThresholdni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DamageThreshold

belongs to
conceptc
has facts
has example datadp "0.6"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

DamageTreatmentni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DamageTreatment

belongs to
conceptc
has facts
has example datadp "1"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

DataSamplingFrequencyni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DataSamplingFrequency

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, A.2.2"@de
has label sourcedp "DIN EN ISO 6892-1, A.2.2"@en
is also defined as
class

DefaultValueni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DefaultValue

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.14"@de
has label sourcedp "DIN EN ISO 6892-1, 3.14"@en
is also defined as
class

DeliveryDateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DeliveryDate

belongs to
conceptc
has facts
has label sourcedp "K-Item"@de
is also defined as
class

Diameterni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Diameter

belongs to
conceptc
has facts
has typical unit labeldp "mm"
is also defined as
class

DiameterAfterFracture1ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DiameterAfterFracture1

belongs to
conceptc
has facts
has typical unit labeldp "mm"
is also defined as
class

DiameterAfterFracture2ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DiameterAfterFracture2

belongs to
conceptc
has facts
has typical unit labeldp "mm"
is also defined as
class

DieToolni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DieTool

belongs to
conceptc
has facts
has example datadp "Bulge DM100"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "deepl translator"@en
is also defined as
class

Discretizationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Discretization

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

Displacementni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Displacement

belongs to
conceptc
has facts
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "deepl translator"@en
has typical unit labeldp "mm"
is also defined as
class

DisplacementTransducerni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DisplacementTransducer

belongs to
conceptc
has facts
has example datadp "Clip gauge"
has example datadp "Tiefungskolben"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "deepl translator"@en
is also defined as
class

DrawingSpeedni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DrawingSpeed

belongs to
conceptc
has facts
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "deepl translator"@en
has typical unit labeldp "mm/min"
is also defined as
class

DualPhaseSteelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DualPhaseSteel

belongs to
conceptc
has facts
has example datadp "HCT980X"
has label sourcedp "DIN EN 10346_2015"@de
is also defined as
class

DX56Dni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DX56D

belongs to
conceptc
has facts
has label sourcedp "DIN EN 10346_2015"@de
has label sourcedp "DIN EN 10346_2015"@en
has label sourcedp "VDA 239-100"@de
is also defined as
class

DynamometerAreani back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/DynamometerArea

belongs to
conceptc
has facts
has label sourcedp "Authors"@de
has label sourcedp "ISO 26203-2, 2011, 4"@en
has symboldp "SD"@en
has symbol latexdp "S_{D}"@en
has typical unit labeldp "mm2"
is also defined as
class

EbsdFileNameni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EbsdFileName

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

EffecticStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EffecticStrain

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has typical unit labeldp "-"
is also defined as
class

EffectiveStressni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EffectiveStress

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has typical unit labeldp "MPa"
is also defined as
class

ElasticConstantC11ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ElasticConstantC11

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "C_11"@en
has typical unit labeldp "MPa"
is also defined as
class

ElasticConstantC12ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ElasticConstantC12

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "C_12"@en
has typical unit labeldp "MPa"
is also defined as
class

ElasticConstantC44ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ElasticConstantC44

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "C_44"@en
has typical unit labeldp "MPa"
is also defined as
class

ElastoplasticModelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ElastoplasticModel

belongs to
conceptc
is also defined as
class

ElementDeletionFlagni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ElementDeletionFlag

belongs to
conceptc
has facts
has example datadp "0"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

ElementDeletionTreatmentni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ElementDeletionTreatment

belongs to
conceptc
has facts
has example datadp "-50"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

Elongationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Elongation

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.3"@de
has label sourcedp "DIN EN ISO 6892-1, 3.3"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has typical unit labeldp "mm"
is also defined as
class

EngineeringStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EngineeringStrain

belongs to
conceptc
has facts
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has symboldp "e"@en
has symbol latexdp "e"@en
has typical unit labeldp "%"
is also defined as
class

EngineeringStressni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EngineeringStress

belongs to
conceptc
has facts
has example datadp "9751"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "R"@en
has symboldp "Sig-technisch"@en
has symbol latexdp "R"@en
has symbol latexdp "Sig-technisch"@en
has typical unit labeldp "MPa"
is also defined as
class

EstimatedStrainRateOverTheParallelLengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EstimatedStrainRateOverTheParallelLength

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.7.2"@de
has label sourcedp "DIN EN ISO 6892-1, 3.7.2"@en
has symboldp "eLc"@en
has symbol latexdp "dot{e}_{L_c}"@en
has typical unit labeldp "s-1"
is also defined as
class

EulerAngle1ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EulerAngle1

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "ϕ_1"@en
has symbol latexdp "varphi_1"@en
is also defined as
class

EulerAngle2ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EulerAngle2

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "φ"@en
has symbol latexdp "phi"@en
is also defined as
class

EulerAngle3ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EulerAngle3

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "ϕ_2"@en
has symbol latexdp "varphi_1"@en
is also defined as
class

EulerAngleConventionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EulerAngleConvention

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

EvaluationMethodni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/EvaluationMethod

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
is also defined as
class

ExperimentIdentifierni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ExperimentIdentifier

belongs to
conceptc
has facts
has example datadp "46NT71"
has label sourcedp "AWA_1_01_Rz-46N171"@de
has label sourcedp "YS1-FzR4-S1Q"@en
is also defined as
class

Extensionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Extension

belongs to
conceptc
has facts
has example datadp "-3.93633e-05"
has example datadp "0.001"
has example datadp "0.026"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "dL"@en
has symbol latexdp "dL"@en
has typical unit labeldp "mm"
is also defined as
class

ExtensionAtFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ExtensionAtFracture

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-Sz0°-S1L"@de
has symbol latexdp "dLBruch"@en
has typical unit labeldp "mm"
is also defined as
class

ExtensionMeasuringSystemni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ExtensionMeasuringSystem

belongs to
conceptc
has facts
has example datadp "HG-Kamera "Photron" Cam. 1"
has label sourcedp "YS1-Fz-D1Q"@de
is also defined as
class

ExtensometerGaugeLengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ExtensometerGaugeLength

belongs to
conceptc
has facts
has example datadp "20"
has example datadp "20.94"
has label sourcedp ""@en
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "DIN EN ISO 6892-1, 3.5"@de
has label sourcedp "DIN EN ISO 6892-1, 3.5"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "L_{0}"@en
has symboldp "Le"@en
has symbol latexdp "L_e"@en
has typical unit labeldp "mm"
is also defined as
class

FadingExponentni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FadingExponent

belongs to
conceptc
has facts
has example datadp "2.5"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

FailureCriteriaTypeAddni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureCriteriaTypeAdd

belongs to
conceptc
has facts
has example datadp "0"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

FailureCriteriaTypeAdd4ElementDeletionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureCriteriaTypeAdd4ElementDeletion

belongs to
conceptc
has facts
has example datadp "5"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

FailureCriteriaTypeAdd4StrainAverageni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureCriteriaTypeAdd4StrainAverage

belongs to
conceptc
has facts
has example datadp "7"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

FailureStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureStrain

belongs to
conceptc
has facts
has example datadp "5"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

FailureStrainIdentifierni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureStrainIdentifier

belongs to
conceptc
has facts
has example datadp "7"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

FailureStrainIdentifier4MeshDependencyni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureStrainIdentifier4MeshDependency

belongs to
conceptc
has facts
has example datadp "4"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

FailureStrainIdentifier4StrainRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureStrainIdentifier4StrainRate

belongs to
conceptc
has facts
has example datadp "5"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

FailureStrainIdentifier4Temperatureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureStrainIdentifier4Temperature

belongs to
conceptc
has facts
has example datadp "2"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

FailureTreatmentni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FailureTreatment

belongs to
conceptc
has facts
has example datadp "1.17"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

FEMSolverni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FEMSolver

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

FinalGaugeLengthAfterFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FinalGaugeLengthAfterFracture

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.1.2"@de
has label sourcedp "DIN EN ISO 6892-1, 3.1.2"@en
has symboldp "Lu"@en
has symbol latexdp "L_u"@en
has typical unit labeldp "mm"
is also defined as
class

FLCDeterminationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FLCDetermination

belongs to
conceptc
has facts
has example datadp "intersection line method"
has label sourcedp "AFZ1-NZ50-25-D1Q"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 19"@en
is also defined as
class

Forceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Force

belongs to
conceptc
has facts
has example datadp "0.105"
has example datadp "2438"
has example datadp "82.0348"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "DIN EN ISO 6892-1, Tabelle 1"@de
has label sourcedp "DIN EN ISO 6892-1, Table 1"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has label sourcedp "deepl translator"@en
has symboldp "F"@en
has symbol latexdp "F"@en
has typical unit labeldp "N"
has typical unit labeldp "kN"
is also defined as
class

ForceAtFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ForceAtFracture

belongs to
conceptc
is also defined as
class

ForceMeasuringDeviceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ForceMeasuringDevice

belongs to
conceptc
has facts
has example datadp "Bulge Druck: Öldruckaufnehmer in der Kammer unterhalb der Probe, Tiefungskraft: Öldruckaufnehmer am Tiefungskolben"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "DIN EN ISO 6892-1, 9"@de
has label sourcedp "DIN EN ISO 6892-1, 9"@en
has label sourcedp "DIN EN ISO 6892-1, G.3.1.1"@de
has label sourcedp "DIN EN ISO 6892-1, G.3.1.1"@en
is also defined as
class

ForceMeasuringSystemni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ForceMeasuringSystem

belongs to
conceptc
has facts
has example datadp "patentierte IWM-Messzelle (quasi-lokal)"
has label sourcedp "YS1-Fz-D1Q"@de
is also defined as
class

FormingLimitCurveni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FormingLimitCurve

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 7"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 7"@en
is also defined as
class

FormingLimitDiagramni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FormingLimitDiagram

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 7"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 7"@en
is also defined as
class

Fractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Fracture

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.11"@de
has label sourcedp "DIN EN ISO 6892-1, 3.11"@en
is also defined as
class

FrameRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/FrameRate

belongs to
conceptc
has facts
has example datadp "1000"
has example datadp "25"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "YS1-Fz-D1Q"@de
has typical unit labeldp "s-1"
is also defined as
class

GaugeLengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/GaugeLength

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.1"@de
has label sourcedp "DIN EN ISO 6892-1, 3.1"@en
has symboldp "L"@en
has symbol latexdp "L"@en
has typical unit labeldp "mm"
is also defined as
class

Gradeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Grade

belongs to
conceptc
has facts
has label sourcedp "K-Item"@de
is also defined as
class

GrainNumberni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/GrainNumber

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

Gridni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Grid

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
is also defined as
class

GridSizeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/GridSize

belongs to
conceptc
has facts
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 12"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 12"@en
has symboldp "L_0"@en
has symbol latexdp "L_0"@en
has typical unit labeldp "mm"
is also defined as
class

HardeningCurveni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HardeningCurve

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

HardeningLawni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HardeningLaw

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

HardeningParameterTau0ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HardeningParameterTau0

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symbol latexdp "tau_0"@en
has typical unit labeldp "MPa"
is also defined as
class

HardeningParameterTau1ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HardeningParameterTau1

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symbol latexdp "tau_1"@en
has typical unit labeldp "MPa"
is also defined as
class

HardeningParameterTheta0ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HardeningParameterTheta0

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symbol latexdp "theta_0"@en
has typical unit labeldp "MPa"
is also defined as
class

HardeningParameterTheta1ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HardeningParameterTheta1

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symbol latexdp "theta_1"@en
has typical unit labeldp "MPa"
is also defined as
class

HCT980Cni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HCT980C

belongs to
conceptc
has facts
has label sourcedp "DIN EN 10346_2015"@en
is also defined as
class

HCT980Xni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HCT980X

belongs to
conceptc
has facts
has label sourcedp "DIN EN 10346_2015"@de
has label sourcedp "DIN EN 10346_2015"@en
has label sourcedp "VDA 239-100"@de
is also defined as
class

HX340LADni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/HX340LAD

belongs to
conceptc
has facts
has label sourcedp "DIN EN 10346"@de
has label sourcedp "DIN EN 10346_2015"@de
has label sourcedp "DIN EN 10346_2015"@en
has label sourcedp "VDA 239-100"@de
is also defined as
class

InitialDisplacementRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/InitialDisplacementRate

belongs to
conceptc
has facts
has example datadp "2500"
has label sourcedp "DIN EN ISO 6892-1, 3.7"@de
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "vo"@en
has symbol latexdp "v_{o}"@en
has typical unit labeldp "mm s -1"
has typical unit labeldp "mm/s or m/s"
is also defined as
class

InitialSheetThicknessni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/InitialSheetThickness

belongs to
conceptc
has facts
has example datadp "1,5"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 9"@de
has symboldp "t_0"@en
has symbol latexdp "t_0"@en
has typical unit labeldp "mm"
is also defined as
class

InitialThicknessni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/InitialThickness

belongs to
conceptc
has facts
has example datadp "1.496"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@en
has symboldp "t_0"@en
has symbol latexdp "t_0"@en
has typical unit labeldp "mm"
is also defined as
class

InnerDiameterBlankHolderni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/InnerDiameterBlankHolder

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@en
has symboldp "d_BH"@en
has symbol latexdp "d_BH"@en
has typical unit labeldp "mm"
is also defined as
class

InnerDiameterDieni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/InnerDiameterDie

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@en
has symboldp "d_die"@en
has symbol latexdp "d_die"@en
has typical unit labeldp "mm"
is also defined as
class

InteractionMatrixni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/InteractionMatrix

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "q_ab"@en
has typical unit labeldp "-"
is also defined as
class

InventoryNumberni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/InventoryNumber

belongs to
conceptc
has facts
has label sourcedp "Messmitteldatenbank"@de
is also defined as
class

Laboratoryni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Laboratory

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
is also defined as
class

LatentHardeningQ0ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/LatentHardeningQ0

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symbol latexdp "q_0"@en
has typical unit labeldp "-"
is also defined as
class

LatentHardeningQ1ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/LatentHardeningQ1

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symbol latexdp "q_1"@en
has typical unit labeldp "-"
is also defined as
class

LatticeStructureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/LatticeStructure

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

Locationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Location

belongs to
conceptc
has facts
has example datadp "Werkstatt"
has label sourcedp "Messmitteldatenbank"@de
is also defined as
class

LowerYieldStrengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/LowerYieldStrength

belongs to
conceptc
has facts
has example datadp "420"
has label sourcedp "DIN EN ISO 6892-1, 3.10.2.2"@de
has label sourcedp "DIN EN ISO 6892-1, 3.10.2.2"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "R_{eL}"@en
has symboldp "ReL"@en
has symbol latexdp "R_{eL}"@en
has typical unit labeldp "MPa"
is also defined as
class

LubricationSystemni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/LubricationSystem

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 17"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 9"@en
is also defined as
class

Machineni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Machine

belongs to
conceptc
has facts
has example datadp "Instron 5985"
has example datadp "SZM100"
has example datadp "SZM500"
has example datadp "ZwickRoell Blechumformprüfmaschine 600kN - BUP600"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "K-Type"@en
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has label sourcedp "deepl translator"@en
has label sourcedp "standard definition specific"@en
has typical unit labeldp "einheitslos"
is also defined as
class

MajorTrueStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MajorTrueStrain

belongs to
conceptc
has facts
has example datadp "0.40799999999999997"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@en
has symboldp "ε_1"@en
has symbol latexdp "ε_1"@en
is also defined as
class

MassDensityni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MassDensity

belongs to
conceptc
has facts
has example datadp "7.8"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "g/cm^3"
is also defined as
class

MAT_ADD_DAMAGE_GISSMOni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MAT_ADD_DAMAGE_GISSMO

belongs to
conceptc
has facts
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
is also defined as
class

Materialni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Material

belongs to
conceptc
has facts
has example datadp "42CrMoS4"
has example datadp "H340LAD"
has example datadp "HX340LAD"
has example datadp "ZStE340"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "AWA_1_01_Rz-46N171"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 7"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
is also defined as
class

Material Cardni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MaterialCard

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

MaterialClassni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MaterialClass

belongs to
conceptc
has facts
has example datadp "Stahl"
has label sourcedp "K-Item"@de
is also defined as
class

MaterialIdentifierni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MaterialIdentifier

belongs to
conceptc
has facts
has example datadp "1c"
has example datadp "2a"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

MaterialInstabilityStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MaterialInstabilityStrain

belongs to
conceptc
has facts
has example datadp "3"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

MatPiecewiseLinearPlasticityni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MatPiecewiseLinearPlasticity

belongs to
conceptc
has facts
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
is also defined as
class

MatPiecewiseLinearPlasticityLogInterpolationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MatPiecewiseLinearPlasticityLogInterpolation

belongs to
conceptc
has facts
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
is also defined as
class

MatTabulatedJohnsonCookni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MatTabulatedJohnsonCook

belongs to
conceptc
has facts
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
is also defined as
class

MatTabulatedJohnsonCookLogInterpolationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MatTabulatedJohnsonCookLogInterpolation

belongs to
conceptc
has facts
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
is also defined as
class

MaximumForceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MaximumForce

belongs to
conceptc
has facts
has example datadp "500 kN"
has example datadp "7008"
has example datadp "7690"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "K-Item"@de
has label sourcedp "Standard definition specific"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "Fm"@en
has symbol latexdp "F_{m}"@en
has symbol latexdp "Fm"@en
has typical unit labeldp "N"
has typical unit labeldp "kN"
is also defined as
class

MaximumForceDiscontinousYieldingni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MaximumForceDiscontinousYielding

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.9.2"@de
has label sourcedp "DIN EN ISO 6892-1, 3.9.2"@en
has symboldp "Fm"@en
has symbol latexdp "F_m"@en
has typical unit labeldp "N"
is also defined as
class

MaximumForceNoDiscontinousYieldingni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MaximumForceNoDiscontinousYielding

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.9.1"@de
has label sourcedp "DIN EN ISO 6892-1, 3.9.1"@en
has symboldp "Fm"@en
has symbol latexdp "F_m"@en
has typical unit labeldp "N"
is also defined as
class

MaximumSpeedni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MaximumSpeed

belongs to
conceptc
has facts
has example datadp "10 m/s"
has label sourcedp "K-Item"@de
is also defined as
class

MeanEngineeringStrainRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MeanEngineeringStrainRate

belongs to
conceptc
has facts
has example datadp "1.0"
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "emean"@en
has symbol latexdp "dot{e}_{mean}"@en
has typical unit labeldp "s-1"
is also defined as
class

MeanPlasticStrainRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MeanPlasticStrainRate

belongs to
conceptc
has facts
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has symboldp "epl"@en
has symbol latexdp "dot{e}_{pl}"@en
has typical unit labeldp "s-1"
is also defined as
class

MeasuringAidni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MeasuringAid

belongs to
conceptc
has facts
has example datadp "Kraftmesszelle"
has label sourcedp "Messmitteldatenbank"@de
is also defined as
class

MeasuringDeviceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MeasuringDevice

belongs to
conceptc
has facts
has example datadp "Hochgeschwindigkeits Prüfmaschine"
has label sourcedp "Messmitteldatenbank"@de
is also defined as
class

MeasuringRangeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MeasuringRange

belongs to
conceptc
has facts
has label sourcedp "K-Item"@de
is also defined as
class

MicroalloyedSteelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MicroalloyedSteel

belongs to
conceptc
has facts
has example datadp "HX340LAD"
has label sourcedp "DIN EN 10346_2015"@de
is also defined as
class

MicrostructureModelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MicrostructureModel

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

MildSteelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MildSteel

belongs to
conceptc
has facts
has example datadp "DX56D"
has label sourcedp "DIN EN 10346_2015"@de
is also defined as
class

MinimumCrossSectionAfterFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MinimumCrossSectionAfterFracture

belongs to
conceptc
has facts
has example datadp "4879"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "DIN EN ISO 6892-1, Tabelle 1"@de
has label sourcedp "DIN EN ISO 6892-1, Table 1"@en
has symboldp "Su"@en
has symbol latexdp "S_{u}"@en
has typical unit labeldp "mm2"
is also defined as
class

MinimumCrosssectionAfterFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MinimumCrosssectionAfterFracture

belongs to
conceptc
has facts
has example datadp "4879"
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "S_{u}"@en
has symboldp "Su"@en
has symbol latexdp "S_{u}"@en
has typical unit labeldp "mm2"
is also defined as
class

MinorTrueStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MinorTrueStrain

belongs to
conceptc
has facts
has example datadp "-0.092000"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@en
has symboldp "ε_2"@en
has symbol latexdp "ε_2"@en
is also defined as
class

MinTimeStep4ElementDelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/MinTimeStep4ElementDel

belongs to
conceptc
has facts
has example datadp "0.000000"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "s"
is also defined as
class

ModulusOfElasticityni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ModulusOfElasticity

belongs to
conceptc
has facts
has example datadp "187170"
has example datadp "210000"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "DIN EN ISO 6892-1, 3.13"@de
has label sourcedp "DIN EN ISO 6892-1, 3.13"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "E"@en
has symbol latexdp "E"@en
has typical unit labeldp "GPa"
has typical unit labeldp "MPa"
is also defined as
class

NominalEngineeringStrainRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/NominalEngineeringStrainRate

belongs to
conceptc
has facts
has example datadp "1.0"
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "enom"@en
has symbol latexdp "dot{e}_{nom}"@en
has typical unit labeldp "s-1"
is also defined as
class

NotchTensileStrengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/NotchTensileStrength

belongs to
conceptc
has facts
has example datadp "468"
has label sourcedp "YS1-FzR4-S1Q"@de
has typical unit labeldp "MPa"
is also defined as
class

NumberFailedIntegrationPointsni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/NumberFailedIntegrationPoints

belongs to
conceptc
has facts
has example datadp "2"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

NumberGrainsni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/NumberGrains

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "N"@en
has symbol latexdp "N"@en
is also defined as
class

NumberOfVirtualExperimentsni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/NumberOfVirtualExperiments

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

Operatorni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Operator

belongs to
conceptc
has facts
has example datadp "auge"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "Authors"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
is also defined as
class

OriginalCrossSectionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/OriginalCrossSection

belongs to
conceptc
has facts
has example datadp "14.98"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "DIN EN ISO 6892-1, Tabelle 1"@de
has label sourcedp "DIN EN ISO 6892-1, Table 1"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has symboldp "S0"@en
has symboldp "So"@en
has symbol latexdp "S_{0}"@en
has symbol latexdp "S_{o}"@en
has typical unit labeldp "mm2"
is also defined as
class

OriginalCrosssectionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/OriginalCrosssection

belongs to
conceptc
has facts
has example datadp "14.98"
has example datadp "15.05"
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "S0"@en
has symboldp "S_{0}"@en
has symbol latexdp "S_{0}"@en
has typical unit labeldp "mm2"
is also defined as
class

OriginalDiameterni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/OriginalDiameter

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, Tabelle 1"@de
has label sourcedp "DIN EN ISO 6892-1, Table 1"@en
has symboldp "do"@en
has symbol latexdp "d_o"@en
has typical unit labeldp "mm"
is also defined as
class

OriginalGaugeLengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/OriginalGaugeLength

belongs to
conceptc
has facts
has example datadp "20"
has example datadp "30"
has example datadp "80"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "DIN EN ISO 6892-1, 3.1.1"@de
has label sourcedp "DIN EN ISO 6892-1, 3.1.1"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "L0"@en
has symboldp "Lo"@en
has symbol latexdp "L_0"@en
has symbol latexdp "L_o"@en
has typical unit labeldp "mm"
is also defined as
class

OriginalThicknessni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/OriginalThickness

belongs to
conceptc
has facts
has example datadp "1.5"
has example datadp "1.55"
has example datadp "1490"
has example datadp "1499"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "DIN EN ISO 6892-1, Table 1"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "a_{0}"@en
has symboldp "ao"@en
has symbol latexdp "a_o"@en
has typical unit labeldp "mm"
is also defined as
class

OriginalWidthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/OriginalWidth

belongs to
conceptc
has facts
has example datadp "10040"
has example datadp "10054"
has example datadp "20.04"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "DIN EN ISO 6892-1, Tabelle 1"@de
has label sourcedp "DIN EN ISO 6892-1, Table 1"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has symboldp "b_{0}"@en
has symboldp "bo"@en
has symbol latexdp "b_o"@en
has typical unit labeldp "mm"
is also defined as
class

ParallelLengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ParallelLength

belongs to
conceptc
has facts
has example datadp "120"
has example datadp "25"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "DIN EN ISO 6892-1, 3.2"@de
has label sourcedp "DIN EN ISO 6892-1, 3.2"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "L_{c}"@en
has symboldp "Lc"@en
has symbol latexdp "L_c"@en
has typical unit labeldp "mm"
is also defined as
class

PercentageElongationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentageElongation

belongs to
conceptc
has facts
has example datadp "-3.93633e-05"
has label sourcedp "DIN EN ISO 6892-1, 3.4"@de
has label sourcedp "DIN EN ISO 6892-1, 3.4"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has typical unit labeldp "%"
has typical unit labeldp "mm"
is also defined as
class

PercentageElongationAfterFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentageElongationAfterFracture

belongs to
conceptc
has facts
has example datadp "35.6"
has example datadp "37.8"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "DIN EN ISO 6892-1, 3.4.2"@de
has label sourcedp "DIN EN ISO 6892-1, 3.4.2"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "A"@en
has symboldp "A20mm"@en
has symboldp "A_{20mm}"@en
has symbol latexdp "A"@en
has symbol latexdp "A_{20mm}"@en
has typical unit labeldp "%"
is also defined as
class

PercentageExtensionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentageExtension

belongs to
conceptc
has facts
has example datadp "0.001"
has example datadp "0.002"
has label sourcedp "AFZ1-Fz-S1Q.xlm"@de
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "eps-technisch"@en
has symbol latexdp "eps-technisch"@en
has typical unit labeldp "- "
has typical unit labeldp "1"
is also defined as
class

PercentagePermanentElongationni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentagePermanentElongation

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.4.1"@de
has label sourcedp "DIN EN ISO 6892-1, 3.4.1"@en
has typical unit labeldp "%"
is also defined as
class

PercentagePermanentExtensionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentagePermanentExtension

belongs to
conceptc
has facts
has example datadp "0.001"
has label sourcedp "AFZ1-Fz-S1Q.xlm"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6.2"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6.2"@en
has symboldp "eps-plast"@en
has symbol latexdp "eps-plast"@en
has typical unit labeldp "%"
has typical unit labeldp "1"
is also defined as
class

PercentagePlasticExtensionAtMaximumForceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentagePlasticExtensionAtMaximumForce

belongs to
conceptc
has facts
has example datadp "14"
has example datadp "16.34"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "DIN EN ISO 6892-1, 3.6.5"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6.5"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "A_{g}"@en
has symboldp "Ag"@en
has symbol latexdp "A_g"@en
has symbol latexdp "A_{g}"@en
has typical unit labeldp "%"
is also defined as
class

PercentageReductionOfAreani back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentageReductionOfArea

belongs to
conceptc
has facts
has example datadp "67.42"
has example datadp "78.0"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "DIN EN ISO 6892-1, 3.8"@de
has label sourcedp "DIN EN ISO 6892-1, 3.8"@en
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "Z"@en
has symbol latexdp "Z"@en
has typical unit labeldp "%"
is also defined as
class

PercentageTotalExtensionAtFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentageTotalExtensionAtFracture

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.6.6"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6.6"@en
has symboldp "At"@en
has symbol latexdp "A_t"@en
has typical unit labeldp "%"
is also defined as
class

PercentageTotalExtensionAtMaximumForceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentageTotalExtensionAtMaximumForce

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.6.4"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6.4"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has symboldp "Agt"@en
has symbol latexdp "A_{gt}"@en
has typical unit labeldp "%"
is also defined as
class

PercentageYieldPointExtensionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PercentageYieldPointExtension

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.6.3"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6.3"@en
has symboldp "Ae"@en
has symbol latexdp "A_e"@en
has typical unit labeldp "%"
is also defined as
class

PermanentSetStrengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PermanentSetStrength

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.10.5"@de
has label sourcedp "DIN EN ISO 6892-1, 3.10.5"@en
has symboldp "Rr"@en
has symbol latexdp "R_{r}"@en
has typical unit labeldp "MPa"
is also defined as
class

PistonSpeedni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PistonSpeed

belongs to
conceptc
has facts
has example datadp "0.15"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
has typical unit labeldp "mm/s"
is also defined as
class

PlasticEngineeringStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PlasticEngineeringStrain

belongs to
conceptc
has facts
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has symboldp "epl"@en
has symbol latexdp "e_{pl}"@en
has typical unit labeldp "%"
is also defined as
class

PoissonRationi back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PoissonRatio

belongs to
conceptc
has facts
has example datadp "0.3"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

PoissonsRationi back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PoissonsRatio

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has symboldp "nue"@en
has symbol latexdp "nue"@en
has typical unit labeldp "1"
is also defined as
class

PostProcessingSoftwareni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PostProcessingSoftware

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

PreliminaryForceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PreliminaryForce

belongs to
conceptc
has facts
has example datadp "0.105"
has example datadp "2"
has label sourcedp "DIN EN ISO 6892-1, 10.2"@de
has label sourcedp "DIN EN ISO 6892-1, 10.2"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "MPa"
has typical unit labeldp "kN"
is also defined as
class

PressureChamberni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PressureChamber

belongs to
conceptc
has facts
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has symboldp "p"@en
has symbol latexdp "p"@en
has typical unit labeldp "MPa"
has typical unit labeldp "N/mm2"
is also defined as
class

PrincipalStressLimit4PostProcessingni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PrincipalStressLimit4PostProcessing

belongs to
conceptc
has facts
has example datadp "9"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

ProjectNameni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ProjectName

belongs to
conceptc
has facts
has example datadp "Crashartig"
has example datadp "Instabilität"
has example datadp "MATERIALDIGITAL"
has example datadp "PMD-Refrenzprozess"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "AWA_1_01_Rz-46N171"@de
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has label sourcedp "deepl translator"@en
is also defined as
class

ProjectNumberni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ProjectNumber

belongs to
conceptc
has facts
has example datadp "100056"
has example datadp "100137"
has example datadp "324116"
has example datadp "40-05452"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "AWA_1_01_Rz-46N171"@de
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "deepl translator"@en
is also defined as
class

ProofStrength_0.2Percentageni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ProofStrength_0.2Percentage

belongs to
conceptc
has facts
has example datadp "397"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has symboldp "Rp02"@en
has symbol latexdp "R_{p02}"@en
has typical unit labeldp "MPa"
is also defined as
class

ProofStrength_1Percentageni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ProofStrength_1Percentage

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has symboldp "Rp1"@en
has symbol latexdp "R_{p1}"@en
has typical unit labeldp "MPa"
is also defined as
class

ProofStrengthPlasticExtensionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ProofStrengthPlasticExtension

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.10.3"@de
has label sourcedp "DIN EN ISO 6892-1, 3.10.3"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has symboldp "Rp"@en
has symbol latexdp "R_{p}"@en
has typical unit labeldp "MPa"
is also defined as
class

ProofStrengthTotalExtensionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ProofStrengthTotalExtension

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.10.4"@de
has label sourcedp "DIN EN ISO 6892-1, 3.10.4"@en
has symboldp "Rt"@en
has symbol latexdp "R_{t}"@en
has typical unit labeldp "MPa"
is also defined as
class

PunchDiameterni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PunchDiameter

belongs to
conceptc
has facts
has example datadp "100"
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@en
has symboldp "D"@en
has symbol latexdp "D"@en
has typical unit labeldp "mm"
is also defined as
class

PunchDisplacementni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PunchDisplacement

belongs to
conceptc
has facts
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has typical unit labeldp "mm"
is also defined as
class

PunchVelocityni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/PunchVelocity

belongs to
conceptc
has facts
has example datadp "1.5"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 13"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 13"@en
has symboldp "v_0"@en
has symbol latexdp "v_0"@en
has typical unit labeldp "mm/s"
is also defined as
class

Radiusni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Radius

belongs to
conceptc
has facts
has example datadp "2"
has example datadp "4"
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "mm"
is also defined as
class

RadiusCurvatureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/RadiusCurvature

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has symboldp "ρ"@en
has symbol latexdp "rho"@en
has typical unit labeldp "mm"
is also defined as
class

RadiusDieni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/RadiusDie

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@en
has symboldp "R_1"@en
has symbol latexdp "R_1"@en
has typical unit labeldp "mm"
is also defined as
class

RateSensitivityOfSlipni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/RateSensitivityOfSlip

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "m"@en
has typical unit labeldp "-"
is also defined as
class

ReferenceElementSizeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ReferenceElementSize

belongs to
conceptc
has facts
has example datadp "0.3"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "mm"
is also defined as
class

ReferenceShearRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ReferenceShearRate

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symbol latexdp "dot{vargamma}_{0}"@en
has typical unit labeldp "-"
is also defined as
class

ReferenceTemperatureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ReferenceTemperature

belongs to
conceptc
has facts
has example datadp "293.14999999999998"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "K"
is also defined as
class

RelativeStandardDeviationOfTheSlopeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/RelativeStandardDeviationOfTheSlope

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.17"@de
has label sourcedp "DIN EN ISO 6892-1, 3.17"@en
has symboldp "Sm(rel)"@en
has symbol latexdp "S_m(rel)"@en
has typical unit labeldp "%"
is also defined as
class

Remarkni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Remark

belongs to
conceptc
has facts
has example datadp "Vorversuch"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-Sz0°-S1L"@de
has label sourcedp "deepl translator"@en
is also defined as
class

ResultsFileni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ResultsFile

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

RollingDirectionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/RollingDirection

belongs to
conceptc
is also defined as
class

RValueni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/RValue

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has symboldp "r-ges"@en
has symbol latexdp "r-ges"@en
has typical unit labeldp "1"
is also defined as
class

SampleCodeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SampleCode

belongs to
conceptc
has facts
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
is also defined as
class

SampleIdentifierni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SampleIdentifier

belongs to
conceptc
has facts
has example datadp "AFZ-BU-S1"
has example datadp "AFZ1-Fz-101Q"
has example datadp "AFZ1-NZ50-25-D1Q"
has example datadp "AFZ1-ST-D1"
has example datadp "AWA_1_01_Rz"
has example datadp "YS1-FzR4-S1Q"
has label sourcedp ""@en
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "AWA_1_01_Rz-46N171"@de
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has label sourcedp "deepl translator"@en
is also defined as
class

SampleIdentifier-2ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SampleIdentifier-2

belongs to
conceptc
has facts
has example datadp "DX56_D_FZ2_WR00_43"
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "deepl translator"@en
is also defined as
class

SerialNumberni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SerialNumber

belongs to
conceptc
has facts
has example datadp "707680 2256611"
has label sourcedp "Messmitteldatenbank"@de
is also defined as
class

ShearLengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ShearLength

belongs to
conceptc
has facts
has example datadp "7"
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "mm"
is also defined as
class

ShearLengthAfterFracture1ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ShearLengthAfterFracture1

belongs to
conceptc
has facts
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "mm"
is also defined as
class

ShearLengthAfterFracture2ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ShearLengthAfterFracture2

belongs to
conceptc
has facts
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "mm"
is also defined as
class

ShearStrengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ShearStrength

belongs to
conceptc
has facts
has example datadp "468"
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "MPa"
is also defined as
class

Sheet thicknessni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SheetThickness

belongs to
conceptc
has facts
has label sourcedp "K-Item"@de
is also defined as
class

SlipSystemNumberni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SlipSystemNumber

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

SlopeElasticPartStressStrainCurveni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SlopeElasticPartStressStrainCurve

belongs to
conceptc
has facts
has label sourcedp "Authors"@de
has label sourcedp "ISO 26203-2, 2011, 4"@en
has symboldp "mE"@en
has symbol latexdp "m_{E}"@en
has typical unit labeldp "MPa"
is also defined as
class

Softwareni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Software

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
is also defined as
class

SpecificHeatCapacityni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SpecificHeatCapacity

belongs to
conceptc
has facts
has example datadp "0.49"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "J/(g*K)"
is also defined as
class

SpecificPlasticWorkni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SpecificPlasticWork

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

SpecificPlasticWorkValueni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SpecificPlasticWorkValue

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

SpecimenWidthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/SpecimenWidth

belongs to
conceptc
has facts
has example datadp "50"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 11"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 12"@de
has symboldp "B"@en
has symboldp "b"@en
has symbol latexdp "B"@en
has symbol latexdp "b"@en
has typical unit labeldp "mm"
is also defined as
class

StandardDeviationOfTheSlopeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/StandardDeviationOfTheSlope

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.16"@de
has label sourcedp "DIN EN ISO 6892-1, 3.16"@en
has symboldp "Sm"@en
has symbol latexdp "S_m"@en
has typical unit labeldp "MPa"
is also defined as
class

Steelni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Steel

belongs to
conceptc
has facts
has example datadp "Dualphasenstahl"
has label sourcedp "DIN EN 10346_2015"@de
is also defined as
class

Strainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Strain

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.6.1"@de
has label sourcedp "DIN EN ISO 6892-1, 3.6.1"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has symboldp "e"@en
has symbol latexdp "e"@en
has typical unit labeldp "%"
is also defined as
class

StrainRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/StrainRate

belongs to
conceptc
has facts
has example datadp "0.001"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "DIN EN ISO 6892-1, 3.7.1"@de
has label sourcedp "DIN EN ISO 6892-1, 3.7.1"@en
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
has symboldp "eLe"@en
has symbol latexdp "dot{e}_{L_e}"@en
has typical unit labeldp "1/s"
has typical unit labeldp "s-1"
is also defined as
class

StrainRateFormulationFlagni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/StrainRateFormulationFlag

belongs to
conceptc
has facts
has example datadp "0"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
is also defined as
class

StrainRateScaleIdendifierni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/StrainRateScaleIdendifier

belongs to
conceptc
has facts
has example datadp "5"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

StrainRateScaleParameterCni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/StrainRateScaleParameterC

belongs to
conceptc
has facts
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

StrainRateScaleParameterPni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/StrainRateScaleParameterP

belongs to
conceptc
has facts
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

Stressni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Stress

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.10"@de
has label sourcedp "DIN EN ISO 6892-1, 3.10"@en
has symboldp "R"@en
has symbol latexdp "R"@en
has typical unit labeldp "MPa"
is also defined as
class

StressRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/StressRate

belongs to
conceptc
has facts
has example datadp "19.63"
has label sourcedp "AFZ1-Fz-S1Q.xlm"@de
has label sourcedp "DIN EN ISO 6892-1, 3.7.4"@de
has label sourcedp "DIN EN ISO 6892-1, 3.7.4"@en
has symboldp "R"@en
has symboldp "dSig/dt"@en
has symbol latexdp "dSig/dt"@en
has symbol latexdp "dot{R}"@en
has typical unit labeldp "MPa s -1"
has typical unit labeldp "MPa/s"
is also defined as
class

Supplierni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Supplier

belongs to
conceptc
has facts
has example datadp "Zwick GmbH"
has example datadp "voestalpine"
has label sourcedp "standard definition specific"@de
is also defined as
class

TangentYieldModulusni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TangentYieldModulus

belongs to
conceptc
has facts
has example datadp "13000"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "MPa"
is also defined as
class

TargetClampingForceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TargetClampingForce

belongs to
conceptc
has facts
has example datadp "600"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "deepl translator"@en
has typical unit labeldp "kN"
is also defined as
class

TaylorQuinneyCoefficientni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TaylorQuinneyCoefficient

belongs to
conceptc
has facts
has example datadp "0.8"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "1"
is also defined as
class

TensileStrengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TensileStrength

belongs to
conceptc
has facts
has example datadp "468"
has example datadp "496"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "DIN EN ISO 6892-1, 3.10.1"@de
has label sourcedp "DIN EN ISO 6892-1, 3.10.1"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "R_{m}"@en
has symboldp "Rm"@en
has symbol latexdp "R_m"@en
has symbol latexdp "R_{m}"@en
has typical unit labeldp "MPa"
is also defined as
class

TensileTestingMachineni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TensileTestingMachine

belongs to
conceptc
has facts
has example datadp "Instron 5985"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "DIN EN ISO 6892-1, A.2.1"@de
has label sourcedp "DIN EN ISO 6892-1, A.2.1"@en
is also defined as
class

Test pieceni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestPiece

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, Tabelle 1"@de
has label sourcedp "DIN EN ISO 6892-1, Table 1"@en
is also defined as
class

TestDirectionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestDirection

belongs to
conceptc
has facts
has example datadp "quer"
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 13"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 5"@en
is also defined as
class

Testerni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Tester

belongs to
conceptc
has facts
has example datadp "Kürzel"
has label sourcedp ""@en
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-Sz0°-S1L"@de
is also defined as
class

TestingDirectionni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestingDirection

belongs to
conceptc
has facts
has example datadp "quer"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "YS1-Sz0°-S1L"@de
is also defined as
class

TestingFacilityni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestingFacility

belongs to
conceptc
has facts
has example datadp "Fraunhofer IWM"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "K-Item"@en
has label sourcedp "deepl translator"@en
is also defined as
class

TestingRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestingRate

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 10.3"@en
has label sourcedp "DIN EN ISO 6892-1, 3.7"@de
is also defined as
class

TestPieceGeometryni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestPieceGeometry

belongs to
conceptc
has facts
has example datadp "Crashbox"
has example datadp "Flach-Zug"
has example datadp "FzA20"
has example datadp "Nakajima Specimen"
has example datadp "Notched Flat tensile Specimen"
has example datadp "Sz0°"
has label sourcedp ""@en
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 11"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 11"@en
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
is also defined as
class

TestPieceLengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestPieceLength

belongs to
conceptc
has facts
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "L_{t}"@en
has typical unit labeldp "mm"
is also defined as
class

TestStandardni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestStandard

belongs to
conceptc
has facts
has example datadp "DIN EN ISO 12004-2"
has example datadp "DIN EN ISO 16808"
has example datadp "DIN EN ISO 6892-1"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "Authors"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@en
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
is also defined as
class

TestTemperaturni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestTemperatur

belongs to
conceptc
has facts
has example datadp "RT"
has label sourcedp "YS1-Fz-D1Q"@de
is also defined as
class

TestTemperatureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestTemperature

belongs to
conceptc
has facts
has example datadp "22"
has example datadp "25"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 13"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 5"@en
has label sourcedp "DIN EN ISO 6892-1, 5"@de
has label sourcedp "DIN EN ISO 6892-1, K.4"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "T"@en
has symbol latexdp "T"@en
has typical unit labeldp "°C"
is also defined as
class

TestTimeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TestTime

belongs to
conceptc
has facts
has label sourcedp "Authors"@de
has label sourcedp "Standard definition specific"@en
has symboldp "tf"@en
has symbol latexdp "t_{f]"@en
has typical unit labeldp "s"
is also defined as
class

Textureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Texture

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

ThicknessAfterFracture1ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ThicknessAfterFracture1

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "mm"
is also defined as
class

ThicknessAfterFracture2ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/ThicknessAfterFracture2

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "YS1-Sz0°-S1L"@de
has typical unit labeldp "mm"
is also defined as
class

Timeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Time

belongs to
conceptc
has facts
has example datadp "0.05"
has example datadp "0.694"
has example datadp "s"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "Authors"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 12"@en
has label sourcedp "DIN EN ISO 6892-1, Abb. 9"@de
has label sourcedp "DIN EN ISO 6892-1, Fig. 9"@en
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has symboldp "t"@en
has symbol latexdp "t"@en
has typical unit labeldp "s"
is also defined as
class

TimeDependentEngineeringStrainRateni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TimeDependentEngineeringStrainRate

belongs to
conceptc
has facts
has example datadp "0.019"
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "e(t)"@en
has symbol latexdp "dot{e(t)}"@en
has typical unit labeldp "s-1"
is also defined as
class

TimeStampni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TimeStamp

belongs to
conceptc
has facts
has example datadp "10-11-16"
has example datadp "11.03.2016"
has example datadp "13/06/2016"
has example datadp "45093.6"
has label sourcedp "AFZ-BU-S1.TXT"@de
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "AFZ1-NZ50-25-D1Q"@en
has label sourcedp "AFZ1-ST-D1"@en
has label sourcedp "YS1-Fz-D1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@de
has label sourcedp "YS1-FzR4-S1Q"@en
has label sourcedp "YS1-Sz0°-S1L"@de
has label sourcedp "deepl translator"@en
is also defined as
class

TotalEngineeringStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TotalEngineeringStrain

belongs to
conceptc
has facts
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has symboldp "et"@en
has symbol latexdp "e_{t}"@en
has typical unit labeldp "%"
is also defined as
class

TotalLengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TotalLength

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, Tabelle 1"@de
has label sourcedp "DIN EN ISO 6892-1, Table 1"@en
has symboldp "Lt"@en
has symbol latexdp "L_t"@en
has typical unit labeldp "mm"
is also defined as
class

TransitionRadiusni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TransitionRadius

belongs to
conceptc
has facts
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Linguee"@de
has symboldp "r"@en
has symbol latexdp "r"@en
has typical unit labeldp "mm"
is also defined as
class

True Strainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TrueStrain

belongs to
conceptc
has facts
has example datadp "0.004"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has symboldp "epsw(dL)"@en
has symbol latexdp "epsw(dL)"@en
has typical unit labeldp "1"
is also defined as
class

True Stressni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TrueStress

belongs to
conceptc
has facts
has example datadp "9752"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "Sigw"@en
has symbol latexdp "Sig{w}"@en
has typical unit labeldp "MPa"
is also defined as
class

TrueFractureStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TrueFractureStrain

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
is also defined as
class

TrueFractureStressni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TrueFractureStress

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@en
has typical unit labeldp "MPa"
is also defined as
class

TruePlasticStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TruePlasticStrain

belongs to
conceptc
has facts
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has typical unit labeldp "1"
is also defined as
class

TruePlasticStrainAtFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TruePlasticStrainAtFracture

belongs to
conceptc
has facts
has example datadp "151.3"
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "e_{w Bruch}"@en
has typical unit labeldp "%"
is also defined as
class

TruePlasticThicknessStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TruePlasticThicknessStrain

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@en
has symboldp "ε_3^pl"@en
has symbol latexdp "ε_3^pl"@en
is also defined as
class

TrueStressAtFractureni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TrueStressAtFracture

belongs to
conceptc
has facts
has example datadp "1526"
has label sourcedp "YS1-Fz-D1Q"@de
has symboldp "Sig_{w Bruch}"@en
has typical unit labeldp "MPa"
is also defined as
class

TrueThicknessStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TrueThicknessStrain

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@de
has label sourcedp "DIN EN ISO 12004-2: 2021_07, 8"@en
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@de
has label sourcedp "DIN EN ISO 16808:2022-08, 4"@en
has symboldp "ε_3"@en
has symbol latexdp "epsilon_3"@en
has symbol latexdp "ε_3"@en
is also defined as
class

TrueTotalStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TrueTotalStrain

belongs to
conceptc
has facts
has label sourcedp "ISO 26203-2, 2011, 4"@en
has label sourcedp "Standard definition specific"@de
has typical unit labeldp "1"
is also defined as
class

TrueWidthStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/TrueWidthStrain

belongs to
conceptc
has facts
has example datadp "0.005"
has label sourcedp "AFZ1-Fz-S1Q.xlm"@de
has symboldp "eps-wBreite"@en
has symbol latexdp "eps-wBreite"@en
has typical unit labeldp "1"
is also defined as
class

UpperYieldStrengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/UpperYieldStrength

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.10.2.1"@de
has label sourcedp "DIN EN ISO 6892-1, 3.10.2.1"@en
has symboldp "ReH"@en
has symbol latexdp "R_{eH}"@en
has typical unit labeldp "MPa"
is also defined as
class

Userni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/User

belongs to
conceptc
has facts
has label sourcedp "General Knowledge"@de
has label sourcedp "General Knowledge"@en
is also defined as
class

Widthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Width

belongs to
conceptc
has facts
has example datadp "4647"
has label sourcedp "AFZ1-Fz-101Q.xlm"@de
has symboldp "B"@en
has symbol latexdp "B"@en
has typical unit labeldp "mm"
is also defined as
class

WidthAfterFracture1ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/WidthAfterFracture1

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has typical unit labeldp "mm"
is also defined as
class

WidthAfterFracture2ni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/WidthAfterFracture2

belongs to
conceptc
has facts
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has typical unit labeldp "mm"
is also defined as
class

WidthChangeni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/WidthChange

belongs to
conceptc
has facts
has example datadp "0.001"
has example datadp "1.14004e-06"
has label sourcedp "AFZ1-Fz-S1Q.xlsx"@de
has label sourcedp "DX56_D_FZ2_WR00_43.TXT"@de
has label sourcedp "deepl translator"@en
has typical unit labeldp "mm"
is also defined as
class

WidthStrainni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/WidthStrain

belongs to
conceptc
has facts
has example datadp "0.003"
has label sourcedp "AFZ1-Fz-S1Q.xlm"@de
has symboldp "eps-Breite"@en
has symbol latexdp "eps-Breite"@en
has typical unit labeldp "1"
is also defined as
class

Workni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/Work

belongs to
conceptc
has facts
has label sourcedp "AFZ1-ST-D1"@en
has typical unit labeldp "kJ"
is also defined as
class

Yield Stressni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/YieldStress

belongs to
conceptc
has facts
has example datadp "290"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "MPa"
is also defined as
class

YieldForce_0.2Percentageni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/YieldForce_0.2Percentage

belongs to
conceptc
has facts
has example datadp "5947"
has label sourcedp "AFZ1-Fz-S1Q.xlm"@de
has symboldp "Fp02"@en
has symbol latexdp "F_{p02}"@en
has typical unit labeldp "kN"
is also defined as
class

YieldingIdentifierni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/YieldingIdentifier

belongs to
conceptc
has facts
has example datadp "1"
has example datadp "7"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

YieldingIdentifierIsoThermalni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/YieldingIdentifierIsoThermal

belongs to
conceptc
has facts
has example datadp "3"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "-"
is also defined as
class

YieldStrengthni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/YieldStrength

belongs to
conceptc
has facts
has label sourcedp "DIN EN ISO 6892-1, 3.10.2"@de
has label sourcedp "DIN EN ISO 6892-1, 3.10.2"@en
has typical unit labeldp "MPa"
is also defined as
class

YoungsModulusni back to ToC or Named Individual ToC

IRI: https://w3id.org/steel/ProcessOntology/YoungsModulus

belongs to
conceptc
has facts
has example datadp "210000"
has label sourcedp "LS-DYNA_Manual_Volume_2"@en
has typical unit labeldp "MPa"
is also defined as
class

Annotation Properties

altlabelap back to ToC or Annotation Property ToC

IRI: http://www.w3.org/2004/02/skos/core#altlabel

descriptionap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/elements/1.1/description

descriptionap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/description

has label source enap back to ToC or Annotation Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasLabelSourceEn

has unit labelap back to ToC or Annotation Property ToC

IRI: https://w3id.org/steel/ProcessOntology/hasUnitLabel

is based onap back to ToC or Annotation Property ToC

IRI: https://w3id.org/steel/ProcessOntology/isBasedOn

preflabelap back to ToC or Annotation Property ToC

IRI: http://www.w3.org/2004/02/skos/core#preflabel

relatedap back to ToC or Annotation Property ToC

IRI: http://www.w3.org/2004/02/skos/core#related

sub class ofap back to ToC or Annotation Property ToC

IRI: http://www.w3.org/2000/01/rdf-schema#subClassOf

Namespace Declarations back to ToC

default namespace
https://w3id.org/steel/ProcessOntology#
ProcessOntology
https://w3id.org/steel/ProcessOntology/
dc
http://purl.org/dc/elements/1.1/
emmo
http://emmo.info/emmo#
owl
http://www.w3.org/2002/07/owl#
pmdco
https://material-digital.de/pmdco/
rdf
http://www.w3.org/1999/02/22-rdf-syntax-ns#
rdfs
http://www.w3.org/2000/01/rdf-schema#
skos
http://www.w3.org/2004/02/skos/core#
steel
https://w3id.org/steel/
terms
http://purl.org/dc/terms/
xsd
http://www.w3.org/2001/XMLSchema#

This HTML document was obtained by processing the OWL ontology source code through LODE, Live OWL Documentation Environment, developed by Silvio Peroni .